Search
Now showing items 1-5 of 5
A Reference Pelton Turbine—Three-Dimensional Flow Front Tracking Within a Rotating Pelton Bucket
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A postprocessing method has been developed to enable the extraction of quantifiable data from images captured from within the rotating frame of reference of a Pelton turbine. The turbine tested was the reference Pelton ...
Design and Fatigue Performance of Large Utility Scale Wind Turbine Blades
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Aeroelastic design and fatigue analysis of large utilityscale wind turbine blades have been performed to investigate the applicability of different types of materials in a fatigue environment. The blade designs used in the ...
Transient Pressure Measurements on a High Head Model Francis Turbine During Emergency Shutdown, Total Load Rejection, and Runaway
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The penetration of intermittent wind and solar power to the grid network above manageable limits disrupts electrical power grids. Consequently, hydraulic turbines synchronized to the grid experience total load rejection ...
Experimental and Numerical Studies for a High Head Francis Turbine at Several Operating Points
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental and numerical studies on a high head model Francis turbine were carried out over the entire range of turbine operation. A complete Hill diagram was constructed and pressuretime measurements were performed at ...
Experimental Investigation of a High Head Francis Turbine During Spin No Load Operation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Water passes freely through a hydraulic turbine in the absence of power requirements or during maintenance of the transmission lines, spillways, or dam. Moreover, the turbine operates under noload conditions prior to ...
CSV
RIS