Search
Now showing items 1-8 of 8
Observations of Transition Phenomena on a Controlled Diffusion Compressor Stator With a Circular Arc Leading Edge
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Laminar-turbulent transition behavior is studied near the leading edge of an outlet stator blade in a low-speed 1.5-stage axial-flow research compressor. The stator is a typical controlled diffusion ...
Impact of Solids Formation and Gas Production on the Permeability of ZVI PRBs
Publisher: American Society of Civil Engineers
Abstract: The permeability of zero-valent iron permeable reactive barriers (ZVI PRBs) may be reduced by the production of gas and solid precipitates. The reduction in permeability was examined using column experiments, which showed ...
Unsteady Transition Phenomena at a Compressor Blade Leading Edge
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Wake-induced laminar-turbulent transition is studied at the leading edge of a C4-section compressor stator blade in a 1.5-stage axial compressor. Surface hot-film sensor observations are interpreted ...
The Influence of Turbulence on Wake Dispersion and Blade Row Interaction in an Axial Compressor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The influence of free-stream turbulence on wake dispersion and boundary layer transition processes has been studied in a 1.5-stage axial compressor. An inlet grid was used to produce turbulence ...
Modeling the Behavior of a 50 MW Direct Steam Generation Plant for Southern Libya Based on the Thermodynamic and Thermophysical Properties of Water Substance
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents arguments for the use of direct steam generation (DSG) in preference to other forms of generation in particular locations according to the prevailing environmental and economic ...
Hydraulic Performance Curves for Highway Culverts
Publisher: American Society of Civil Engineers
Abstract: This paper presents a versatile two-parameter model describing the hydraulic performance of highway culverts operating under inlet control for both unsubmerged and submerged conditions. Applications show that the model can ...
A Comparative Investigation of Round and Fan-Shaped Cooling Hole Near Flow Fields
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study presents velocity and turbulence data measured experimentally in the near field of a round and a laterally expanded fan-shaped cooling hole. Both holes are fed by a plenum inlet, ...
Distribution of Wind Loads in Metal-Clad Roofing Structures
Publisher: American Society of Civil Engineers
Abstract: The roof is the part that experiences the largest wind load and is usually the most vulnerable part of a house. However, data on how the wind loads are transferred through the roof structure are scarce. The fluctuating ...
CSV
RIS