Search
CSV
RISDiscussion: “Elastic-Plastic Deformation in Edge-Notched Tension Specimens Under Plane Stress Conditions” (Griffis, C. A., 1973, ASME J. Eng. Mater. Technol., 95, pp. 130–132)
Publisher: The American Society of Mechanical Engineers (ASME)
A Note on Stress-Concentration Factors for Symmetric U-Shaped Notches in Tension Strips
Publisher: The American Society of Mechanical Engineers (ASME)
Note on Stress and Strain Redistribution in a Notched Plate Specimen During Cyclic Loading
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A finite-element computational method is employed to determine the spatial distribution of stress and strain in a notched-plate fatigue specimen fabricated of mild steel. Because of cyclic strain ...
Fatigue-Crack Growth-Rate Studies of Low-Alloy Pressure-Vessel Steels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fatigue-crack growth rates were determined at room temperature for ASTM A302-Class B and A 508-Class 2 steels in two characteristic plate and forging directions. Tests were performed under ...
Fracture Toughness Determinations of A-302B and Ni-Mo-V Steels With Various Size Specimens
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fracture tests were conducted on three steels obtained from heavy-section pieces over a range of test temperatures using single-edge notched (SEN) specimens under tensile loading and notched-bar ...
Long-Life Fatigue Test Results for Two Nickel-Base Structural Alloys
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper reports the results of fatigue tests on two nickel-base alloys, hot-cold-worked and stress-relieved nickel-chrome-iron Alloy 600 and mill-annealed nickel-chrome-moly-iron Alloy 625 in ...