Search
CSV
RISBayesian Inference for the Calibration of Cohesive Zone Models of Dovetail Specimens From Laminated Composite Fan Blade
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Composite fan blades are the preferred alternative for the fan stage of most advanced high bypass ratio turbofan engines. The dovetail part bears a significant centrifugal load, and its ability to safely bear this load is ...
Effect of Channel Geometry on Formability of 304 Stainless Steel Bipolar Plates for Fuel Cells—Simulation and Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A bipolar plate (BP) is one of the key components of proton exchange membrane fuel cells (PEMFCs) and accounts for a major portion of their manufacturing cost. Stainless steel is considered as one of the candidate materials ...
Origami Based Self Folding Structure Design and Fabrication Using Projection Based Stereolithography
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Selffolding structures have unique capability such as reconfiguration during their usage. Such capability can be beneficial for a wide variety of applications including biomedical and electronics products. In this paper, ...
Smooth Surface Fabrication Based on Controlled Meniscus and Cure Depth in Microstereolithography
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the layerbased additive manufacturing (AM) processes, a threedimensional (3D) model is converted into a set of twodimensional (2D) layers. Due to such conversion, one of the major problems in the layerbased AM processes ...
Photocuring Temperature Study for Curl Distortion Control in Projection-Based Stereolithography
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Polymerization shrinkage and thermal cooling effect have been identified as two major factors that lead to the curl distortion in the stereolithography apparatus (SLA) process. In this paper, the photocuring temperature ...
Mask Image Planning for Deformation Control in Projection Based Stereolithography Process
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The maskimageprojectionbased stereolithography process (MIPSL) using a digital micromirror device (DMD) is an areaprocessingbased additive manufacturing (AM) process. In the MIPSL process, a set of mask images are dynamically ...
Direct Geometry Processing for Telefabrication
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a new approach for telefabrication where a physical object is scanned in one location and fabricated in another location. This approach integrates threedimensional (3D) scanning, geometric processing ...
Development of a Low Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Most additive manufacturing (AM) processes are layerbased with three linear motions in the X, Y, and Z axes. However, there are drawbacks associated with such limited motions, e.g., nonconformal material properties, ...
Determination of Local Geoid with Geometric Method: Case Study
Publisher: American Society of Civil Engineers
Abstract: Precise determination of a local geoid is of particular importance for global positioning system (GPS) height determination. The geometric method has been widely used for a relatively small area, which interpolates geoid ...
Comparative Study of the Shock Resistance of Rubber Protective Coatings Subjected to Underwater Explosion
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Finite element simulations of rubber protective coatings with different structures under two dynamic loading cases were performed. They were monolithic coating and honeycomb structures with three different cell topologies ...