Search
CSV
RISA Minimum Creep Rate for 2-1/4Cr-1Mo Steel Consistent With the ASME Section III, Division 5 Rules
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This technical note describes a minimum creep rate model for 2-1/4Cr-1Mo steel that is consistent with the current creep strain equation embedded in the ASME Boiler & Pressure Vessel Code Section III, Division 5, ...
Effect of Outlet Boundary Condition on the Acoustic Modeshape and Flame Dynamics of a Partially Premixed Swirl Stabilized Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Industrial gas turbines commonly use lean premixed swirl stabilized combustors that are prone to thermo-acoustic instabilities. Combustor testing involves several steps ranging from atmospheric to high-pressure conditions. ...
The Effect of Multiple Coexisting Convective Modes in Determining Thermoacoustic Behavior of a Partially Premixed Swirl Flame
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study focuses on the effect of multiple heat release mode interactions on the amplitude of unsteady pressure oscillation for a partially premixed radial swirl burner, which uses methane as fuel. A range of operating ...
Partially Premixed Flame Stabilization in the Presence of a Combined Swirl and Bluff Body Influenced Flowfield: An Experimental Investigation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Optical and laser diagnostic measurements in a nonpremixed model gas turbine (GT) burner have been performed to investigate the effect of an increase in thermal power on the flame stabilization. The model GT burner has a ...