Abstract: The smart cement behavior with 0.3% sodium metasilicate (SMS) at 80°C (176°F) under two different environments was investigated in this study. The smart cement was made using the class H oil well cement and 0.1% conductive ...

Abstract: The effect of polymer content and glass‐fiber content on the compressive behavior of polyester polymer concrete is investigated at room temperature. The polymer content varies between 10% and 18% of the total weight of ...

Abstract: Epoxy-based coatings are used in the rehabilitation and protection against acid attack in industrial and wastewater facilities made of concrete and clay bricks. In this study, the performance of two epoxy-based coatings ...

Abstract: The compressive and tensile properties of polyester polymer and polymer concrete were studied under various curing conditions, temperature, and strain rate. The curing temperature was varied from room temperature to 80°C. ...

Abstract: Lead removal from water and contaminated soils was investigated using biosurfactant, anionic, and nonionic surfactants in continuously stirred batch reactors. Lead-contaminated water up to

Abstract: The behavior of polymer concrete (PC) and polyester polymer when exposed to water was investigated over a maximum period of 1 and 3 yr, respectively. Also the effect of sulfuric acid (H

Abstract: The behavior of coated cement concrete in water and sulfuric acid was investigated over a three-year period. Two epoxy-based coatings were selected and cylindrical concrete specimens were coated and used in this investigation. ...

Abstract: Elastic wave theory is utilized to investigate the influence of interface boundary conditions on the dynamic characteristics of a circular cylindrical structure subjected to steady-state and ...

Abstract: Pipe-in-Pipe (PIP) configurations are considered as a practical solution to deepwater oil production to prevent hydrate formation and paraffin deposition during the transportation of crude oil to production facilities. The ...