Abstract: Tantalum refractory liners were explosively clad into cylindrical pressure vessels, some of which had been previously autofrettaged. Using explosive cladding, the refractory liner formed a metallurgical ...

Abstract: Three-dimensional residual stress mapping of an aluminum 2024-T3 arcan specimen, butt-welded by the friction stir technique, was performed by neutron diffraction. Results indicate that the residual ...

Abstract: Figure 2 on p. 216 of the article does not have the correct dimensions for the Arcan test specimens. The discrepancy can be seen by comparing Fig. 2 to Fig. 6 in the article. The properly ...