Search
Now showing items 1-8 of 8
Design, Development, and Operation of an Integrated Fluidized Carbon Capture Unit Using Polyethylenimine Sorbents
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents the design, development, and operation of a reactor system for CO2 capture. Modifications were implemented to address differences in sorbent from 180 μm Geldart group B to 115 μm Geldart group A material; ...
Special Issue: Selected Papers From the 42th International Technical Conference on Clean Coal and Fuel Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: ecial issue contains selected papers presented at the 42nd International Clearwater Clean Energy Conference. The conference was held at the Sheraton Sand Keys Hotel, Clearwater, FL during June 11–15, 2017. The endorsing ...
The Effect of Thermal Treatment of Hematite Ore for Chemical Looping Combustion of Methane
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: For chemical looping processes to become an economically viable technology, an inexpensive carrier that can endure repeated reduction and oxidation cycles needs to be identified or developed. Unfortunately, the reduction ...
Computational Fluid Dynamics Modeling of the Fuel Reactor in NETL's 50 kWth Chemical Looping Facility
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The National Energy Technology Laboratory (NETL) has explored chemical looping in its 50 kWth facility using a number of oxygen carriers. In this work, the results for methane conversion in the fuel reactor with a hematite ...
Process Failure Detection via Recurrence Quantification Analysis in a Slot-Rectangular Spouted Bed
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A study was conducted to explore the applicability of recurrence and recurrence quantification analysis (RQA) to the detection of process failures in spouted bed reactor systems. Three different potential failure modes ...
Estimation of Minimum Spouting Velocity in a Rectangular Spouted Bed
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A study was conducted to explore the effects of static bed height, nozzle diameter, cone angle, and particle properties on the minimum spouting velocity in a 4 in × 1 in rectangular spouted bed. Tests were conducted with ...
Analysis of a Vortexing Circulating Fluidized Bed for Process Intensification Via High-G Flows
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fluidized beds are used in many industries where gas–solid reactions are present for their favorable characteristics of good solids mixing, high heat, and mass transfer rates, and large throughputs. In an attempt to increase ...
Effects of Riser Diameter on Solids Holdup and Particle Velocity Profiles in Circulating Fluidized Bed Riser Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Tests were performed in a 0.1-m diameter small circulating fluidized bed (SCFB) and 0.3 m diameter cold flow circulating fluidized bed (CFCFB) riser systems located at the National Energy Technology Laboratory (NETL) to ...