Search
CSV
RISA Simple and Fast Method for Calculating Properties Across a Condensation Shock
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A simple procedure for calculating the pressure at the onset and termination of condensation shocks that occur in steam nozzles and steam turbine blade passages is presented. In addition, the location of the termination ...
Large Eddy Simulation on the Interactions of Wake and Film Cooling Near a Leading Edge
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The unsteady flow physics due to interactions between a separated shear layer and film cooling jet apart from excitation of periodic passing wake are studied using large eddy simulation (LES). An aerofoil of constant ...
Estimation of Collapse Load of Single-Cell Concrete Box-Girder Bridges
Publisher: American Society of Civil Engineers
Abstract: The simplified equations available at present to predict the collapse loads of single-cell concrete box-girder bridges with simply supported ends are based on either space truss analogy or collapse mechanisms. Experimental ...
Correction of Errors in Simplified Transverse Bending Analysis of Concrete Box-Girder Bridges
Publisher: American Society of Civil Engineers
Abstract: In design practice, the transverse bending analysis of box-girder bridges is commonly done by modeling the cross section as a frame of unit width with imaginary supports at the web locations. The transverse bending moments ...
Extended GLOSS Method for Determining Inelastic Effects in Mechanical Components and Structures: Isotropic Materials
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The extended GLOSS method of analysis has been presented here that leads to conservative bounds on inelastic local strains. Consequently, the local region constraint parameter (λ̄) is determined ...
An Experimental Investigation on Mechanical and Wear Properties of Al7075/SiCp Composites: Effect of SiC Content and Particle Size
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: One of the major advantages of metal matrix composites (MMCs) is that their tailorable properties meet the specific requirements of a particular application. This paper deals with the experimental investigations done on ...
Special Issue on Hazardous Nuclear Waste Disposal
Publisher: American Society of Civil Engineers
Probabilistic Evaluation of the Uplift Capacity of Transmission Tower Foundations Using Reinforced Anchors
Publisher: ASCE
Abstract: The present study pertains to the probabilistic assessment for analysis and design of uplift capacity of transmission tower foundation reinforced with horizontal anchor using the radial basis function (RBF)-based response ...
Behavior of Timber Joints with Multiple Nails
Publisher: American Society of Civil Engineers
Abstract: An attempt was made to study the effect of the number of nails on the stiffness of laterally‐loaded timber joints with interface friction, fabricated with 2–8 nails in a row. A mathematical model was developed to predict ...
Investigations on Laser Dressing of Grinding Wheels—Part II: Grinding Performance of a Laser Dressed Aluminum Oxide Wheel
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Based on the results of the preliminary study on the influence of high intensity Nd: YAG laser radiation on grinding wheel constituents, an experimental set-up for dressing a grinding wheel ...