Search
Now showing items 1-10 of 10
Axial Pullout Behavior of Buried Medium-Density Polyethylene Gas Distribution Pipes
Publisher: ASCE
Abstract: This paper presents an experimental investigation into the axial pullout behavior of buried medium-density polyethylene (MDPE) pipes under various pulling rates. Tests were conducted in a facility developed at the Memorial ...
Assessment of Axial Pullout Force for Buried Medium-Density Polyethylene Pipelines
Publisher: ASCE
Abstract: The maximum axial force on a pipeline subjected to axial ground movement is commonly calculated using a design equation developed without proper consideration of soil-pipe interaction. The authors’ recent work revealed ...
Modeling Time-Dependent Behavior of Medium-Density Polyethylene Pipes
Publisher: ASCE
Abstract: Medium-density polyethylene (MDPE) pipes are widely used for gas transmission and distribution systems. The behavior of the pipes buried in the ground is governed by soil–pipe interaction. MDPE possesses a time-dependent ...
Three-Dimensional Finite-Element Modeling of Polyethylene Pipes in Dense Sand Subjected to a Lateral Force
Publisher: ASCE
Abstract: Buried medium-density polyethylene pipes are conveniently used in gas distribution systems, particularly in areas subjected to ground movements, due to their flexible property to accommodate large deformation. The pipelines ...
Investigation of the Burst Pressure of a Pipeline with an Inclined Corrosion Defect Using FE Analysis
Publisher: American Society of Civil Engineers
Abstract: The steel pipelines used for oil and gas transportation are subjected to corrosion during the service life, which reduces the strength of the pipelines. The maximum operating pressure of a corroded pipeline depends on the ...
Nonlinear Time-Dependent Mechanical Behavior of Medium-Density Polyethylene Pipe Material
Publisher: ASCE
Abstract: Medium-density polyethylene (MDPE) pipes are extensively used for gas distribution systems in Canada and worldwide. MDPE pipe material possesses time-dependent mechanical properties that govern the performance of the pipes ...
Effects of Corrosion Pits on Wall Stresses in Cast-Iron Water Mains
Publisher: American Society of Civil Engineers
Abstract: Circumferential cracking or ring fracture has been identified as the most common type of failure mode for cast-iron water mains. However, the cause of circumferential cracking in water mains is not well understood. A number ...
Accounting for Source Location on the Vulnerability Assessment of Water Distribution Network
Publisher: ASCE
Abstract: The vulnerability of water distribution networks (WDNs) to water-main breaks is used for prioritizing pipes in the network for maintenance planning. In this paper, a parameter of graph theory, algebraic connectivity (AC), ...
Laboratory Investigation of Buried Small-Diameter Steel Pipes Subjected to Axial Ground Movement
Publisher: American Society of Civil Engineers
Abstract: Small-diameter steel pipes are often used for the distribution of gas to residential homes. These pipelines must service the end-user, even in landslide-prone areas, necessitating the study of their response to ground ...
Interpretation of Acoustic Field Data for Leak Detection in Ductile Iron and Copper Water-Distribution Pipes
Publisher: American Society of Civil Engineers