Search
Now showing items 1-10 of 18
The Determination of Thermal Diffusivities of Thermal Energy Storage Materials: Part II—Molten Salts Beyond the Melting Point
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A quasisteady method for measuring the thermal diffusivity of molten salts at temperatures above their melting point is described. Essentially, the difference between the temperature at the surface ...
A Study of Thermal Transpiration for the Development of a New Type of Gas Pump
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thermal transpiration, the phenomenon of the flow of gases through porous media under the influence of a temperature gradient, can be utilized as a driving force in a new type of gas pump. ...
Solving Flow-Constrained Networks: Inverse Problem
Publisher: American Society of Civil Engineers
Abstract: Necessary and sufficient conditions for solving flow-constrained networks are developed. These conditions are predicated on the interrelation between the decision variables specified and the network-flow hydraulics. They ...
The Determination of Thermal Diffusivities of Thermal Energy Storage Materials, Part I: Solids up to Melting Point
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes a method for the determination of thermal diffusivities which has been developed specifically for substances which are poor conductors and which have high melting points. ...
Strip Extensiometry for Comparison of the Mechanical Response of Bovine, Rabbit, and Human Corneas
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Specimens of bovine, rabbit, and human corneas were systematically tested in uniaxial tension to experimentally determine their effective nonlinear stress-strain relations, and hysteresis. Cyclic ...
An In-Process Intervention to Mitigate the Effect of Built-Up Edges in Micromilling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper is focused on developing an in-process intervention technique that mitigates the effect of built-up edges (BUEs) during micromilling of aluminum. The technique relies on the intermittent removal of the BUEs ...
Dual-Permeability Modeling of Capillary Diversion and Drift Shadow Effects in Unsaturated Fractured Rock
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The drift-shadow effect describes capillary diversion of water flow around a drift or cavity in porous or fractured rock, resulting in lower water flux directly beneath the cavity. This paper ...
Discrete Volume‐Element Method for Network Water‐Quality Models
Publisher: American Society of Civil Engineers
Abstract: An explicit dynamic water‐quality modeling algorithm is developed for tracking dissolved substances in water‐distribution networks. The algorithm is based on a mass‐balance relation within pipes that considers both advective ...
Discrete Simulation Approach for Network-Water-Quality Models
Publisher: American Society of Civil Engineers
Abstract: An efficient system simulation methodology that solves the contaminant-transport problem in drinking-water-distribution systems is developed. The method can be effectively used for modeling the time-varying interaction of ...
Discussion and Closure: Solving Flow-Constrained Networks: Inverse Problem
Publisher: American Society of Civil Engineers