Search
Now showing items 1-6 of 6
Free-Stream Effects on the Cooling Performance of Cylindrical and Fan-Shaped Cooling Holes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: From literature and our own studies, it is known that the effects of hot gas cross-flow and, in particular, the turbulence of the hot gas flow highly influence the spreading of the coolant ...
Effect of Geometry Variations on the Cooling Performance of Fan-Shaped Cooling Holes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The flow conditions at both the cooling hole exit as well as the cooling hole entrance affect the cooling performance downstream of cylindrical and fan-shaped holes in a very different way. ...
Effect of Crossflows on the Discharge Coefficient of Film Cooling Holes With Varying Angles of Inclination and Orientation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measurements of discharge coefficients for five configurations of cylindrical film cooling hole geometries are presented. These comprise holes of varying angles of inclination (α=30, 45, and 90 ...
Effect of Internal Coolant Crossflow on the Effectiveness of Shaped Film-Cooling Holes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Film-cooling was the subject of numerous studies during the past decades. However, the effect of flow conditions on the entry side of the film-cooling hole on film-cooling performance has ...
Free-Stream Turbulence Effects on Film Cooling With Shaped Holes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A comprehensive set of generic experiments has been conducted to investigate the effect of elevated free-stream turbulence on film cooling performance of shaped holes. A row of three cylindrical ...
Film Cooling Performance of Sharp Edged Diffuser Holes With Lateral Inclination
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study on film cooling performance of laterally inclined diffuser shaped cooling holes is presented. The measurements have been conducted on a flat plate with coolant ejected from ...