Search
Now showing items 1-6 of 6
Frictional Pressure Losses for Annular Flow of Drilling Mud and Mud-Gas Mixtures
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The calculation of single-phase and two-phase flowing pressure gradients in a well annulus is generally based on an extension of empirical correlations developed for Newtonian fluids in circular ...
An Analysis of the Design Loads Placed on a Well by a Diverter System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Diverter systems, used as a means of well control while drilling surface hole, have a history of occasional failure. This paper addresses excessive back pressure, which can result in mechanical ...
New Model to Analyze Nonlinear Leak-Off Test Behavior
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A leak-off test (LOT) is a verification method to estimate fracture pressure of exposed formations. After cementing each casing string, LOT is run to verify that the casing, cement and formation ...
Co-Current and Countercurrent Migration of Gas Kicks in “Horizontal” Wells
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Results from experiments conducted in downward liquid-gas flows in inclined, eccentric annular pipes, with water and air as the working fluids, are presented. The gas was injected in the middle ...
Frictional Pressure Losses for Single-Phase and Two-Phase Flow of Drilling Muds
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The vertical flow of mud and gas-mud mixtures in long pipes is of interest in the design and operation of subsea well control equipment where long choke lines are required. Heretofore, the ...
Counter-Current and Co-Current Gas Kicks in “Horizontal” Wells: Non-Newtonian Rheology Effects
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Results from experiments conducted in downward liquid-gas flows in inclined, eccentric annular pipes, with water-air and water-polymer-air mixtures as the working fluids, are presented. The gas ...
CSV
RIS