Search
CSV
RISComputer-Controlled System for Nondestructive Thickness Measurement of Corroded Steel Structures
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Over a period of time, corrosion attacks the surface of offshore and waterfront steel structures and can cause catastrophic failures. To date, thickness measurement to determine loss from corrosion ...
Stability Analysis of Finite Offset-Halves Pressure Dam Bearing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cylindrical pressure dam bearings are manufactured in two halves. During assembly, intentionally or accidentally, the centers of two halves may get displaced. This paper analytically analyzes the ...
Underwater Tests on Corroded Steel Piles With the Thickness Measurement by Beam Alignment System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An ultrasonic thickness measurement by beam alignment (TMBA) system developed by Southwest Research Institute was tested on underwater corroded steel piles at the Port Hueneme Harbor near Los ...
Effect of Preset on the Performance of Finite Journal Bearings Supporting Rigid and Flexible Rotors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A large number of cylindrical bearings are manufactured in two halves and assembled in such a way that there exists a possibility that the center may get displaced along the parting line. ...
A Closed-Form Planet Load Sharing Formulation for Planetary Gear Sets Using a Translational Analogy
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A simplified discrete model to predict load sharing among the planets of a planetary gear set having carrier planet position errors is presented in this study. The model proposes a translational ...
Global Stress-Strain Behavior of Perforated Plate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present paper establishes and interprets the global uniaxial stress-strain behavior of regularly perforated plate, throughout the elastic, partly plastic, and fully plastic regimes up to ...
Influence of Ring Gear Rim Thickness on Planetary Gear Set Behavior
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this study, results of an experimental and theoretical study on the influence of rim thickness of the ring gear on rim deflections and stresses and planet load sharing of a planetary gear ...
An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load Sharing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, results of an experimental study are presented to describe the impact of certain types of manufacturing errors on gear stresses and the individual planet loads of an n-planet ...
Detecting Gear Tooth Breakage Using Acoustic Emission: a Feasibility and Sensor Placement Study
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Vibration and debris monitoring methods are being increasingly used to detect gear tooth breakage. In this paper an alternate method of detecting gear tooth cracking is investigated. It is based ...
Dynamic Dislocation-Defect Analysis and SAXS Study of Nanovoid Formation in Aluminum Alloys
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Crystalline defects other than the essential dislocations are produced by dislocation intersections resulting in debris, which can transform into loops, point defects, and∕or nanovoids. The stress ...