Search
CSV
RISSome Questions Regarding the Interaction of Creep and Fatigue
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Data are presented from fatigue-crack growth tests conducted on Type 304 S.S. in inert environments at elevated temperatures which show that the thermal-activation noted in similar tests run in ...
Fatigue-Crack Growth Behavior in Fast-Neutron-Irradiated Ferritic Steels and Weldments
Publisher: The American Society of Mechanical Engineers (ASME)
Letter to the Editor
Publisher: The American Society of Mechanical Engineers (ASME)
Fatigue-Crack Propagation Behavior of Incoloy 800 at Elevated Temperatures
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Linear-elastic fracture mechanics techniques were used to characterize the fatigue-crack propagation behavior of Incoloy 800 in an air environment over the temperature range 75 to 1200 deg F (24 ...
The Effect of Temperature Upon the Fatigue-Crack Growth Behavior of Two Nickel-Base Alloys
Publisher: The American Society of Mechanical Engineers (ASME)
The Effect of Temperature and Cyclic Frequency Upon Fatigue Crack Growth Behavior of Several Steels in an Elevated Temperature Aqueous Environment
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fatigue crack propagation (FCP) behavior of several ASTM A302-B and A508-2 steels was characterized in deaerated elevated temperature aqueous environment. FCP behavior was determined over the ...
Ramberg-Osgood Strain-Hardening Characterization of an ASTM A302-B Steel
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The Ramberg-Osgood strain-hardening exponents and coefficients are characterized for an unirradiated ASTM A302-B steel over a wide range of temperatures from −129 to 260°C. The strain-hardening ...
The Effect of Product Form Upon Fatigue-Crack Growth Behavior in Alloy 718
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Five different product forms (sheet, plate, bar, forging, and weldments) all taken from the same heat of Alloy 718 were tested at five different temperatures in each of two different heat-treated ...