YaBeSH Digital Library: Recent submissions
Now showing items 9161-9180 of 316660
-
Balancing the Mechanical Performance and Environmental Sustainability of Fiber-Reinforced Concrete
(American Society of Civil Engineers, 2025)Fiber-reinforced concrete (FRC) can have improved durability and tensile properties, potentially enabling the more efficient use of concrete and lowering greenhouse gas (GHG) emissions. Yet, systematic quantifications of ... -
Fracture and Mechanical Properties of GGBFS-Based Geopolymer Concrete Incorporating Rice Husk Ash and Natural Zeolite
(American Society of Civil Engineers, 2025)Geopolymer concrete (GPC) cured under ambient conditions is a sustainable alternative to conventional cement concrete in building and construction applications. Despite its potential, few comprehensive studies, to our best ... -
Preparation and Characterization of SBS/CR/LNBR Composite Modified Asphalt for 3D Printing Applications
(American Society of Civil Engineers, 2025)Integrating three-dimensional (3D) printing technology for road crack filling offers promising pavement construction convenience by reducing manual labor and providing better performance. However, the typical styrene-but ... -
Bonding of TRM and Salt Erosion–Degraded Masonry: Experimental Characterization and Analysis
(American Society of Civil Engineers, 2025)This study investigated the interfacial bonding between textile-reinforced mortar (TRM) and erosion-deteriorated masonry using single shear testing and digital image correlation. Various factors, including the number of ... -
Insights into the Alteration in the Interfacial Performance of Polymer Coating between Clay and Cement Substrates
(American Society of Civil Engineers, 2025)The adhesive strength at the interface of a clay–polymer composite is observed to reduce as a cementitious substrate comes at its proximity. The physical phenomena governing the interfacial behavior of clay–polymer composites ... -
Effect of Dynamic Disulfide Bonds on Microstructure, Storage Stability, and Self-Healing Performance of Desulfurized Waste Crumb Rubber–Modified Asphalt
(American Society of Civil Engineers, 2025)Endowing waste crumb rubber–modified asphalt (CRMA) with superior self-healing capability can extend the service life of asphalt pavement. In this study, 3,3’-dithiodipropionic acid (DPA) with dynamic disulfide bonds was ... -
Stability Assessment of Pile Foundations for an Elevated Viaduct: Case Study of the Indore Metro Railway in India
(American Society of Civil Engineers, 2025)The present study focuses on the stability assessment of pile foundations for an elevated viaduct in the context of the Indore Metro Rail Project in India. The research addresses deviations observed during construction, ... -
Determining the Water-to-Cement Ratio of Freshly Mixed Concrete: Applying the Modified Coarse Aggregate Correction Factor to the AASHTO T 318 Method
(American Society of Civil Engineers, 2025)The water-to-cement ratio (w/c) is of great importance for concrete quality control. The microwave oven drying measurement method given in the AASHTO standard, Standard Method of Test for Water Content of Freshly Mixed ... -
Impact of Curing Age and Capillary Action on Microstructural and Stress–Strain Response of a Geopolymer-Stabilized Sandy Soil
(American Society of Civil Engineers, 2025)This study investigated the improvement in a type of sand using a geopolymer made of recycled glass powder (RGP) as the base material and sodium hydroxide (NaOH) as the alkaline activator. Using maximum uniaxial compressive ... -
Effect of Nanoclay on the Rheological Properties, Rutting, Fatigue, and Storage Stability of Polymer-Modified Binder
(American Society of Civil Engineers, 2025)The main purpose of this study is to determine the physical and performance properties of binders modified with styrene–butadiene–styrene (SBS) and/or nanoclay and compare the behavior of polymer-modified binders (PMB) and ... -
Fatigue Life Analysis of Basalt Fiber–Reinforced Concrete under Axial Constant-Amplitude Cyclic Tension
(American Society of Civil Engineers, 2025)The aim is to research the fatigue life of basalt fiber–reinforced concrete (BFRC) under axial constant-amplitude cyclic tension. The two factors, stress level and basalt fiber volume fraction, were considered. Twelve sets ... -
Estimation of Low-Temperature Performance Grading of Modified Asphalt Binders Using the Critical Stress Intensity Factor
(American Society of Civil Engineers, 2025)Cracking in pavements due to low temperature is the predominant distress in cold climate areas. The bending beam rheometer (BBR) test is typically utilized to determine the low-temperature performance of the asphalt binders. ... -
Research on Mode I Fracture Properties of Bamboo Scrimber Based on DIC Technology
(American Society of Civil Engineers, 2025)To promote the application of bamboo scrimber (BS) in the construction field, it is necessary to study the fracture properties concerning its structural design and reliability analysis. In this paper, the Mode I fracture ... -
Preparation and Hardening Performance of a Novel Surface Treatment Agent for Portland Cement–Based Materials
(American Society of Civil Engineers, 2025)Surface treatment is essential for enhancing the mechanical performance of Portland cement–based materials. In this study, polymerized siloxane (PS) is proposed as a novel surface treatment agent. PS was synthesized from ... -
Study on the Influence of Supplementary Cementitious Materials on Fast Hardening Sulfoaluminate Cement–Engineered Cementitious Composites
(American Society of Civil Engineers, 2025)To enhance the application effect of engineered cementitious composites in rapid repair engineering, this study prepared early strength and fast hardening sulfoaluminate cement–engineered cementitious composites (S-ECC) ... -
Comparing the Effects of NH4H2PO4 and Na3PO4 on the Properties of Hardened Portland Cement Paste
(American Society of Civil Engineers, 2025)Phosphates are a commonly used class of inorganic retarders for portland cement. Normally, previous studies focused on the effects of phosphates on the early hydration of cement paste. In this study, the effects of NH4H2PO4 ... -
Correlation between the Performance of Asphalt Fine Aggregate Matrix and the Performance of Hot-Asphalt Mix under Ultraviolet Aging
(American Society of Civil Engineers, 2025)The performance of hot-asphalt mix (HMA) is significantly impacted by ultraviolet (UV) aging. While asphalt fine aggregate matrix (FAM) is a crucial component of HMA, its impact on the material’s performance during UV aging ... -
Factors Influencing the Collapse of Granular Columns Based on Discrete-Element Simulation
(American Society of Civil Engineers, 2025)In this study, model tests on the collapse of sand granular columns are designed to investigate the relationship between the initial stacking height and the maximum run-out distance of the granular column, and the results ... -
Mixture Design and Multiobjective Optimization of Industrial Wastes toward Geotechnical Applications
(American Society of Civil Engineers, 2025)This study introduces a novel optimization methodology for industrial waste soil stabilizers combining the mixture design (MD), the back-propagation neural network (BPNN), and the nondominated sorting genetic algorithm II ... -
Evaluating the Effects of Nanomaterials on Thermal Cracking of HMA in the Presence of Moisture with Different Degrees of Acidity
(American Society of Civil Engineers, 2025)Several factors, including constituents, pavement structure geometry, and environmental conditions, influence the low-temperature performance of hot-mix asphalt (HMA). Moisture is a critical factor related to environmental ...