YaBeSH Digital Library: Recent submissions
Now showing items 8701-8720 of 316660
-
Characterization of Crankcase Ventilation Gas on Stationary Natural Gas Engines
(The American Society of Mechanical Engineers (ASME), 2025)Natural gas stands out as a prominent alternative fuel, boasting a well-established infrastructure for extraction and transport, substantial cost advantages, and potential for mitigating greenhouse gas (GHG) emissions. Its ... -
Numerical Computation of Time-Averaged Acoustic Radiation Force on Arbitrarily Shaped Particles Using an Improved Immersed Boundary Method
(The American Society of Mechanical Engineers (ASME), 2025)This work focuses on the numerical computations of the second-order time-averaged acoustic radiation force on solid particles with complex geometries based on the perturbation theory and linear scattering approximation. ... -
Mechanical Properties and Radon Gas Emanation Analysis of Composite Bricks Reinforced With Cellulose Nanofibrils and Graphene Oxide
(The American Society of Mechanical Engineers (ASME), 2025)Graphene oxide (GO) and cellulose nanofibrils from pineapple leaf (PLCNF) and sugarcane bagasse (SCBCNF) have been utilized to observe the mechanical enhancement in composite bricks and radon reduction levels. The cellulose ... -
A Semi-Active Dynamic Rapid Evaluate and Adjust Device for Prescribing Custom Foot Orthoses
(The American Society of Mechanical Engineers (ASME), 2025)Traditional custom foot orthoses (CFO) prescription methods often suffer from lengthy processing times, material waste due to refabrication, inconsistent performance due to inaccurate foot alignment, and inadequate ... -
A Deep-Learning-Based LSTM Approach for Multiphase Rate Transient Analysis in Tight and Ultratight Reservoir
(The American Society of Mechanical Engineers (ASME), 2025)This paper developed a long short-term memory (LSTM)-based deep learning for rate transient analysis in tight and ultratight (shale) reservoirs and proposed a workflow to quantitatively evaluate fracture parameters. The ... -
Evaluation of Phase Transformation on Boron Decorated Sn-1.5Ag-0.7 Cu Joined Cu Pillar for Packaging Connection
(The American Society of Mechanical Engineers (ASME), 2025)The microstructure transformation, mechanical properties, and fracture behavior of boron (B) decorated tin (Sn)-1.5%Ag-0.7%copper (Cu) (SAC157) solder joints with Cu pillars were analyzed. Three concentrations of B (0.015%, ... -
Piecewise Linear Vibrations of a Cracked Beam
(The American Society of Mechanical Engineers (ASME), 2025)We consider the piecewise linear (PWL) vibrations in a cracked Rayleigh beam. The change in local stiffness at the crack site due to a mode-1 crack is introduced through a PWL flexural spring such that the local stiffness ... -
Resolving of Transportation Issue With High Activity Positron Emission Tomography Radiotracer Source to Long Distance Medical Imaging Centers
(The American Society of Mechanical Engineers (ASME), 2025)In Indian scenario, single positron emission tomography (PET) radiotracer isotope production center is catering PET radiopharmaceuticals to multiple medical imaging centers, located far away from the production center. ... -
A Rapidly Attachable Pulse Oximeter Prototype for Enhanced Efficiency and Safety of Neonatal Monitoring in Clinical Settings
(The American Society of Mechanical Engineers (ASME), 2025)Monitoring vital signs in neonates, particularly during resuscitation and intensive care, is critical for effective neonatal management. Accurate measurements of blood oxygen saturation and heart rate are essential for ... -
Modeling and Optimization of the Compressive Strength of an Alkali-Activated Material Using a Mixed Full Factorial Design
(The American Society of Mechanical Engineers (ASME), 2025)The aim of the present work is to carry out a technical study on blast furnace slag-based alkali-activated binders, using the design of experiments methodology. A four-factor, mixed-level (two and three) full factorial ... -
Study on Shale Oil Heating Development Based on Embedded Discrete Fracture Model
(The American Society of Mechanical Engineers (ASME), 2025)Heating development has become the main development mode of medium- to low-maturity shale oil. In this study, the thermodynamic mathematical models of flow and heating development of organic matter, inorganic matter, ... -
An Unsteady Deposition Model for Evaluating CMAS Nonuniform Deposition Behavior and Aerodynamic Performance Degradation Under Hot Streak Clocking Effect
(The American Society of Mechanical Engineers (ASME), 2025)An unsteady model has been developed for evaluating deposition behavior and aerodynamic performance degradation under the impact of hot streak. The results reveal that hot streak alters the force exerted by the mainstream, ... -
Computational Framework for Computational Fluid Dynamics Analysis of Loop Thermosiphon Based Embedded Cooling Systems
(The American Society of Mechanical Engineers (ASME), 2025)Loop thermosiphons (LTSs) are highly effective two-phase heat spreaders, enabling significant heat transport through passive liquid–vapor phase-change, particularly beneficial in electronics cooling. However, prior studies ... -
Quasi-Periodic Motions of a Gear Transmission System With Piecewise Linearities by the Incremental Harmonic Balance Method With Two Timescales
(The American Society of Mechanical Engineers (ASME), 2025)Quasi-periodic motions can be numerically found in piecewise-linear systems, however, their characteristics have not been well understood. To illustrate this, an incremental harmonic balance (IHB) method with two timescales ... -
Direct Normal Irradiance Prediction-Based Optimum Interval Tilt Angles for Enhancement of Energy Output, Levelized Cost of Energy, and CO2 Emission in a Grid-Connected Photovoltaic System
(The American Society of Mechanical Engineers (ASME), 2024)The tilt angle of photovoltaic (PV) panels is a crucial determinant of their performance and can be adjusted using different tracking methods. Periodically changing the tilt angle strikes a practical balance between ... -
A Mathematical Model Design for Pu Content Analyzed by 244Cm in Spent Fuel of Fast Reactors
(The American Society of Mechanical Engineers (ASME), 2025)Pyroprocessing is employed in the reprocessing of integral fast reactors (IFRs). According to China's domestic regulations of nuclear material control, analysis of the content of uranium (U) and plutonium (Pu) should be ... -
Mechatronics Development and Control of a Lower Limb Exoskeleton With High-Torque Assistance
(The American Society of Mechanical Engineers (ASME), 2025)Spinal cord injuries and strokes can lead to severe mobility impairments. Assistive devices, such as exoskeletons, can help individuals regain mobility and the strength to move their limbs. Developing these devices to be ... -
Influence of Microwave-Treated Waste Aramid Fibers on the Mechanical Behavior of 3D-Printed Composite Materials
(The American Society of Mechanical Engineers (ASME), 2025)Industrial surface modification techniques are commonly employed to enhance the adhesion between polymer matrices and aramid fibers (AFs) in composite materials. However, these techniques are often associated with high ... -
Flow Characterization of Capillary Underfill in Multi-Chip Heterogenous Integration Using Computational Fluid Dynamics
(The American Society of Mechanical Engineers (ASME), 2025)Underfill encapsulation is crucial in assembling flip-chip products, such as ball grid array packages, enhancing the reliability and performance of electronic packages by filling voids between integrated circuit chips and ... -
On the Simulations Concerning the Dynamics and Control of Space Manipulator Systems
(The American Society of Mechanical Engineers (ASME), 2025)There has been an increasing attention toward the research of space manipulator systems for different applications like on-orbit servicing, debris removal, etc. from various institutions across the globe. This resulted in ...