YaBeSH Digital Library: Recent submissions
Now showing items 5541-5560 of 316660
-
Establishment of Risk Management Groups in Construction Based on Workers’ Age and Accident Probability Using Unsupervised Learning
(American Society of Civil Engineers, 2025)AbstractThe construction industry is currently experiencing increased risks due to the aging workforce. As workers age, their physical capabilities often decline, leading to an increased likelihood of accidents. Despite ... -
Experimental Observations of the Effect of MICP on the Deformation Mechanisms of a Layered Formation during Sand Production
(American Society of Civil Engineers, 2025)AbstractSignificant gas hydrate resources are located offshore in the upper sedimentary layers. At present, depressurization has yielded the highest extraction rates, although sand production has been the major ongoing ... -
Novel Rainfall Thresholds for Shallow Slip Prediction Based on Field Monitoring: Case Study of the Lattari Mountains, Italy
(American Society of Civil Engineers, 2025)AbstractFlowlike landslides (debris flows, debris avalanches, and flowslides) often initiate as shallow slip and, due to their propagation downslope, pose significant threats to infrastructure and human lives worldwide. ... -
Hydraulic Properties of the Subgrade with a Hydrophobic Barrier in Saline Soil Areas: Soil Column Tests and Numerical Analysis
(American Society of Civil Engineers, 2026)AbstractIn saline soil areas, the intrusion of moisture and salt into the road or railway subgrades can prompt their decay and consequently impact the infrastructure. This study proposes a novel measure, namely the hydrophobic ... -
Field Investigation of Deflection Characteristics and Control Strategies of a Short Floating Pile Adjacent to Deep Excavation
(American Society of Civil Engineers, 2025)AbstractThis case study aims to evaluate the impact of deep excavation on the adjacent short floating pile and lateral deformation control strategies using capsule expansion technology (CET). Two control strategies, ... -
Fractional-Order Derivative, Bounding Surface Plasticity–Based Anisotropic NorSand: Formulation and Validation
(American Society of Civil Engineers, 2025)AbstractThe NorSand model is used for the constitutive modeling of granular materials, particularly loose tailings, as it incorporates the material’s state in its formulation. However, there are some drawbacks such as not ... -
Prediction of the Hydraulic Conductivity Function over the Entire Moisture Range Using Common SWRC Model Parameters
(American Society of Civil Engineers, 2025)AbstractThe common models for predicting the hydraulic conductivity function, namely the Brooks–Corey–Burdine model and the van Genuchten–Mualem model, are applicable only to degrees of saturation above the residual degree ... -
Simplified Approximate Method for the Seismic Analysis of Rocking Pile Groups
(American Society of Civil Engineers, 2026)AbstractA simplified approximate method to analyze the rocking response of pile groups subjected to seismic loading is introduced. The proposed method accounts for the nonlinear response of the soil and reinforced concrete ... -
Coarse-Grained Geomaterials Characterization Using the High-Frequency Electromagnetic Induction Technique
(American Society of Civil Engineers, 2025)AbstractElectromagnetic induction (EMI) technique has been used in the large-scale geological mapping investigation; however, few studies have associated small-scale EMI responses and soil pore characteristics. We developed ... -
Double Convolution Methodology for Developing Input Ground Motions for Site Response and Nonlinear Dynamic Analyses
(American Society of Civil Engineers, 2025)AbstractNumerical simulations are increasingly used in the assessment of structures for design purposes and the forensic evaluation of past earthquake-induced failures. These simulations require input ground motions to be ... -
A Tensor Decomposition–Based Reduced-Order BMC-ST Method for the Analysis of Saturated Porous Media Consolidation
(American Society of Civil Engineers, 2026)AbstractThis paper proposes a tensor decomposition–based reduced-order model of the space–time boundary mapped collocation (BMC-ST) method for analyzing the consolidation behavior of saturated porous media. One of the core ... -
Thermomechanical Deformation in Functionally Graded Fiber-Reinforced Media through Fractional-Order Strain
(American Society of Civil Engineers, 2025)Abstract This article addresses the modified theory of fractional-order strain, built upon the Lord–Shulman generalized theory of thermoelasticity. A theoretical framework was formulated to explore the influence of fractional ... -
Analysis of Elastic-Plastic Crack Initiation and Evolution at the Tip of an Unsaturated Inclined Open Crack under Ice–Gas–Ice Pressure
(American Society of Civil Engineers, 2026)AbstractThe surfaces of mountain slopes in high-altitude and cold regions contain numerous microdefects and macrodefects. These exposed cracks on the rock mass surface provide favorable channels for the flow of water and ... -
Stochastic Analysis of Fractional Structural Systems Subjected to Fractional Ground Motions
(American Society of Civil Engineers, 2026)AbstractIn this paper, the nonstationary stochastic response of fractional structural systems subjected to fractional excitations is examined. Fractional operators provide an effective mathematical construct to model energy ... -
Hybrid Analytical–Machine Learning Framework for SH-Wave Dispersion in Piezo-Flexoelectric Layered Structures with Imperfect Interfaces
(American Society of Civil Engineers, 2026)AbstractThis study presents a hybrid analytical–machine learning (ML) framework for modeling shear-horizontal (SH) wave propagation in piezo-flexoelectric (PFE) layered structures with imperfect interfacial bonding. The ... -
Local Buckling Analysis of Thin- and Thick-Walled Circular Hollow Sections under Pure Bending Using a Third-Order Shear Deformation Finite Strip with a Drilling Degree of Freedom
(American Society of Civil Engineers, 2026)AbstractThis study develops the semianalytical finite strip method (SAFSM) based on third-order shear deformation plate theory (TSDT), incorporating a sixth degree of freedom derived from continuum mechanics’ true rotation. ... -
Integrating Bi-Bi-LSTM-Based Virtual Sensing and VAE for Sensor-Efficient Unsupervised Structural Damage Detection
(American Society of Civil Engineers, 2026)AbstractA key component to determining bridge conditions and functionality is implementing structural health monitoring (SHM) systems that analyze structural behavior under variable loading conditions. Effective data-driven ... -
Mechanism and Parametric Study of Double-Layer Multibar Tensegrity Structures
(American Society of Civil Engineers, 2026)AbstractThis study investigates the construction mechanism of double-layer multibar tensegrity structures through comprehensive analytical and computational approaches. By developing a systematic splicing strategy for basic ... -
Dispersion Characteristics of Shear Horizontal Waves in a Porous Magnetoelastic Multilayered Structure
(American Society of Civil Engineers, 2026)AbstractThe paper presents an analytic scheme to investigate the transference of the shear horizontal wave (SH-wave) in an n-layered porous magnetoelastic layered structure with initial stress. The poroelastic medium’s ... -
Surface Elasticity and Residual Stress Effects on the Dynamic Stability of Axially Excited Nanobeams Using Floquet–Lyapunov Theory
(American Society of Civil Engineers, 2026)AbstractThis work presents a unified, size-aware study of the dynamic stability of submicrometer beams embedded in an elastic medium and subjected to combined static and harmonic axial loading. Timoshenko and Euler–Bernoulli ...