YaBeSH Digital Library: Recent submissions
Now showing items 4461-4480 of 316660
-
Pore Morphology and Orientation-Induced Mechanical Orthotropic Behavior of 3D-Printed Concrete Filament
(American Society of Civil Engineers, 2026)AbstractThe mechanical anisotropy of three-dimensional–printed concrete (3DPC) has recently raised significant concerns. This research focuses on the impact of pore morphology and orientation on the mechanical properties ... -
Assessment of Swelling Behavior in Thermally Treated Soil Mixtures for Use as Barrier Fillers in High-Level Radioactive Waste Repositories
(American Society of Civil Engineers, 2026)AbstractBentonite-based mixtures are promising buffer materials for high-level radioactive waste repositories, but their performance can be affected by heat from decaying nuclear waste. This study investigated the swelling ... -
Mechanical Characteristics and Planting Performance of Ecological Concrete Produced Using Low-Quality Aggregate
(American Society of Civil Engineers, 2026)AbstractLow-quality rocks obtained from engineering excavation generally are considered to be unsuitable for direct application and are typically discarded. This practice results in challenges such as land utilization and ... -
Dynamic Responses of Embankment Resting on Liquefiable Foundation Soil under Pulse- and Nonpulse-Type Ground Motions
(American Society of Civil Engineers, 2025)Abstract This study examines the fragility response of an earthen embankment supported on a liquefiable deposit subjected to pulse and nonpulse ground motions. Fragility curves are developed based on two key parameters, ... -
Combined Adoption of TIPA and C-S-Hs-PCE to Enhance Early-Age Hydration Kinetics of Lithium Slag–Cement Composite Binder
(American Society of Civil Engineers, 2026)AbstractSynergistic action of triisopropanolamine (TIPA) and calcium silicate hydrates (C-S-Hs)–polycarboxylate (PCE) nanocomposites on the rheological and hydration performance of lithium slag (LS) blended binder was ... -
Effects of Tension and Compression Stresses on the Quasistatic and Dynamic Elastic Moduli of Pine Lumber
(American Society of Civil Engineers, 2026)Abstract This study investigates the effects of tension and compression stresses on the quasistatic and dynamic elastic moduli of pine lumber. Utilizing prismatic specimens of Uruguayan-sourced Pinus elliottii, the research ... -
Geomechanical Characteristics of Micaceous Sand under Static and Repeated Loading Conditions
(American Society of Civil Engineers, 2026)AbstractThe geomechanical characteristics of sand are adversely affected by the presence of mica due to its resilient and rebound nature and crushing upon repeated loading. This behavior of micaceous sand triggers major ... -
Ultraviolet Aging Resistance of Asphalt Modified with Ce-Doped Bentonite
(American Society of Civil Engineers, 2026)AbstractBentonite and cerous ions were introduced to investigate their effect on the antiultraviolet aging of asphalt. In this paper, Ce-doped bentonite is obtained by mixing cerous nitrate with calcined activated bentonite. ... -
Carbide Slag-Driven Activation of Granulated Blast Furnace Slag/Electric Arc Furnace Slag Hybrid System: A Cost-Effective and Low-Alkalinity Cementitious Material Design
(American Society of Civil Engineers, 2026)AbstractTo address the resource utilization bottleneck caused by the low activity of steel slag (SS), this study investigated the influence of electric arc furnace slag (EAFS) and carbide slag (CS) on the strength of ... -
A Novel Design Approach for Recycled Hot Asphalt Mixtures Based on Multisupport Framework Theory
(American Society of Civil Engineers, 2026)AbstractGrowing emphasis on environmental sustainability has driven increased utilization of reclaimed asphalt pavement (RAP). However, the incomplete blending of RAP asphalt with virgin asphalt in recycled hot asphalt ... -
Identification of Fracture Characteristics of Cement-Stabilized Macadam with Super-Absorbent Polymer Based on Acoustic Emission
(American Society of Civil Engineers, 2026)AbstractSuper-absorbent polymer (SAP) is recognized as one of the most promising internal curing materials because of its outstanding internal curing performance. It has been shown to mitigate self-shrinkage and crack ... -
Quantification and Standardization of Workability Retention and Setting Times of Lime-Based Mortars and the Influence of Organic Set Regulators
(American Society of Civil Engineers, 2025)AbstractAir lime mortars are a compatible material for the repair of ancient structures but require modifications to meet modern requirements. Since ancient times, the inclusion of pozzolans and organic admixtures in air ... -
Fracture Toughness Investigations of Aligned Steel Fiber-Reinforced Cement-Based Composite Considering Crack Deflection Angle
(American Society of Civil Engineers, 2026)AbstractThe fracture process of fiber-reinforced concrete is typically accompanied by a deflected crack propagation trajectory that could influence the fracture mode. In this study, an external magnetic field was applied ... -
Advanced Quantum Chemical Simulations to Achieve Sustainable Self-Repair of Oxidized SBS Polymers Using Reactive Repair Materials
(American Society of Civil Engineers, 2026)AbstractThe oxidative degradation of styrene-butadiene-styrene (SBS) polymers is the main reason for the substantial difficulty of the sustainable recycling of waste SBS asphalt pavements. Reactive repair materials containing ... -
Vibration Velocity Response in Sandy Foundations under Embedded Blast Loading: A Field Experimental Study
(American Society of Civil Engineers, 2025)Abstract Vibration velocities generated by embedded blasting in sandy soil foundations exhibit significant spatial anisotropy, with notable variations in predominant frequencies. Therefore, it is necessary to develop ... -
Insight into Complex Rheological Behavior of Warm-Mix Rubberized Asphalt from the Microinteraction between Asphalt Phase and Rubber Phase
(American Society of Civil Engineers, 2026)AbstractWarm-mix crumb rubberized asphalt is an increasingly popular eco-friendly pavement material, but its complex rheological properties limit large-scale application. Investigating the microscale interactions among ... -
Performance and Integrity of Calcined Perlite Concrete at Varied Thermal Conditions: Mechanical and Microstructural Insights
(American Society of Civil Engineers, 2025)AbstractThis study evaluates the mechanical, durability, and thermal characteristics of perlite binary concrete (PBC) for potential use in contemporary large-scale structures. This novel concrete is prepared by partial ... -
Strength Development, Microstructure Evolution, and Durability Behavior of Fly Ash–GGBS-Based Geopolymer Mortar Exposed to Sulfuric Acid Solution
(American Society of Civil Engineers, 2026)AbstractThis study investigates the sulfuric acid (H2SO4) resistance of fly ash–ground granulated blast furnace slag (GGBS)-based geopolymer mortar made with various GGBS contents, i.e., 0%, 20%, and 40% by mass of ... -
Examining Tensile Properties of Glass Fine Aggregate Concrete Using Brazilian Splitting Tests
(American Society of Civil Engineers, 2026)AbstractStudies on the fundamental mechanical properties of glass concrete have predominantly focused on its compressive properties. This study investigates the effect of waste glass aggregate on the tensile properties of ... -
Mechanical and Durability Properties of Slag-Based Alkali-Activated Concrete with Glass Textile and Polypropylene Fibers as a Sustainable Construction Material
(American Society of Civil Engineers, 2026)AbstractThis study presents a sustainable building material that utilizes alkali-activated slag (AAS) concrete, in alignment with advancements in environmentally friendly construction technologies. Glass textile-reinforced ...