YaBeSH Digital Library: Recent submissions
Now showing items 4361-4380 of 316660
-
Mechanical Response and Cracking Behavior of Defected and Tailings-Filled Layered Specimens
(American Society of Civil Engineers, 2026)AbstractThis study investigated the impact of tailings-filled material on the mechanical properties and fracture behavior of defected layered specimens under uniaxial compression. PFC2D was used to analyze the internal ... -
Air Entrainment, Carbonation, and Shrinkage in Concrete Containing Reclaimed Water-Based Paint
(American Society of Civil Engineers, 2026)AbstractIncorporating postconsumer reclaimed water-based paint (RWBP) into concrete provides a sustainable alternative to landfill disposal. However, the application of RWBP-incorporating concrete has remained limited ... -
Effect of Edge Distance on Sheathing-to-Frame Nail Connections: Experimental and Statistical Analysis
(American Society of Civil Engineers, 2026)AbstractSheathing-to-frame nail connections (SFNCs) are integral to light-frame wood shear walls. This study presents experimental results from six groups of specimens subjected to monotonic loading to analyze failure modes ... -
A Dynamic Response Model of Subgrade Vibratory Compaction Considering Nonlinear Plastic Deformation of Soil and Jump Vibration of the Drum
(American Society of Civil Engineers, 2025)Abstract Intelligent compaction (IC) has recently gained widespread attention due to its ability to address the issues of low quality and efficiency in traditional subgrade compaction quality control approaches. The dynamic ... -
Study on the Properties and Mechanism of Recycled Glass Fiber–Cementitious Materials Modified with a Silane Coupling Agent
(American Society of Civil Engineers, 2026)AbstractTo address the strength degradation of recycled waste glass fiber–reinforced plastics (RGFRP) caused by poor alkali resistance during recycling, this study proposed the surface modification strategy using a silane ... -
Residual Interface Adhesion Properties between Lightweight Engineered Cementitious Composites and Concrete after Elevated Temperatures
(American Society of Civil Engineers, 2026)AbstractLightweight engineered cementitious composites (LECCs) can provide many advantages compared with engineered cementitious composites (ECCs), for instance, high strength-to-weight ratio, low resilience, good thermal ... -
Developing Global Warming Potential Criteria for Balanced Asphalt Mixes with Emerald Eco-Label EPDs
(American Society of Civil Engineers, 2026)AbstractThis study integrates balanced mix design (BMD) thresholds with Environmental Product Declarations (EPDs) for asphalt mixtures at three nominal maximum aggregate sizes (NMAS): 9.5, 12.5, and 19 mm. The primary ... -
Influence of High Curing Pressure on the Hydration Process and Multiscale Properties of Concrete
(American Society of Civil Engineers, 2026)AbstractWith subterranean excavation engineering being applied to ultradeep geological formations, fresh concrete is cured in a wide range of pressure conditions. However, a lack of understanding regarding the fundamental ... -
Impact of Production Temperatures on Blending Condition between Virgin and Aged Asphalt: Performance and Environmental Cost Analysis
(American Society of Civil Engineers, 2026)AbstractThe application of hot recycled asphalt mixtures has been increasing in practical engineering in recent years. However, due to concerns about the performance of recycled mixtures with high reclaimed asphalt pavement ... -
Preparation and Water Stability of Permeable Polyurethane Mixtures
(American Society of Civil Engineers, 2026)AbstractIn response to the development of “sponge cities,” permeable pavements have been increasingly used in road construction to eliminate the adverse effects caused by traditional pavements. In recent years, permeable ... -
Resistance Mechanism of Hybrid Fiber-Reinforced Tailing Mortar under Freeze–Thaw and Sulfate Attack
(American Society of Civil Engineers, 2026)AbstractThe continuous increase in the emissions of iron ore tailings (IOTs) has caused serious pollution to the environment and raised costly IOT management costs. For protecting the environment and decreasing the economic ... -
Comprehensive Laboratory Testing for Reducing Low-Temperature Cracking of Asphalt Mixtures
(American Society of Civil Engineers, 2026)AbstractThis paper assesses the effects of aggregate, binder, reclaimed asphalt pavement (RAP), and asphalt mixture properties on asphalt roadway low-temperature cracking resistance. A comprehensive laboratory testing ... -
Synergistic Effects of RHA, UFA, and GGBS on Physical, Rheological, Mechanical Properties of Alkali-Activated Grouting Material
(American Society of Civil Engineers, 2026)AbstractAlkali-activated grouting material is a promising grouting material. This study developed a solid waste alkali-activated grouting material using rice husk ash (RHA), ultrafine fly ash (UFA) and ground granulated ... -
Rheological and Fresh-State Characterization for 3D-Printable Concrete: Evaluating Printability across Different Binder Systems
(American Society of Civil Engineers, 2026)AbstractThis study establishes rheological criteria to achieve optimal printability for concrete mixes incorporating various binder systems. The mixtures were evaluated based on critical design parameters for three-dimensional ... -
An Isotach Approach for Considering the Rate-Dependent Axial-Loading Behavior of Open Steel Piles Driven in Chalk
(American Society of Civil Engineers, 2025)Abstract This paper analyzes the effects of loading rate on the axial shaft capacity and stiffness for piles driven in the low-to-medium density chalk, taking advantage of a series of field maintained load (ML) tests. As ... -
Mechanical Performance and Microstructure of Silica Powder–Calcium Binder Systems Fabricated by Binder Jetting 3D Printing
(American Society of Civil Engineers, 2026)AbstractThis study investigates the feasibility of using a silica powder–calcium-based binder material system for binder jetting (BJ) 3D printing of rocklike materials. After particle size grading, silica powder was mixed ... -
Feasibility of Using California-Based Almond Shells for Alkali Activation of Slag: Physicochemical Properties and Hydration Behavior of Almond Ash Binders
(American Society of Civil Engineers, 2026)AbstractThis study investigated the feasibility of using almond shell ash, a byproduct of California’s almond industry, as an alternative alkali source in alkali-activated binders (AABs) based on ground-granulated blast ... -
Development of a Novel Ester-Functionalized PCE and Assessment of Its Impact on Rheology of Cement Paste
(American Society of Civil Engineers, 2026)AbstractThis study examines how varying ester group content in polycarboxylate superplasticizers (PCEs) affects the workability and adaptability of cement paste to external factors. PCE, a high-performance concrete admixture, ... -
Properties of Thermosetting Polyurethane/Nano-TiO2 Composite-Modified Asphalt and Its Mixtures
(American Society of Civil Engineers, 2026)AbstractThis study prepared a composite-modified asphalt to address the challenges of asphalt pavement aging and cracking caused by elevated temperatures and ultraviolet (UV) radiation. The composite includes thermosetting ... -
Diatomite as a Pozzolana Alternative for Soil Stabilization: Investigating Effects in Natural and Lime-Amended Conditions
(American Society of Civil Engineers, 2026)AbstractLime is one of the most researched additives for soil stabilization. Due to their high silica (SiO2) content, pozzolans have also attracted significant attention from researchers in this field. Diatomite, a pozzolan ...