YaBeSH Digital Library: Recent submissions
Now showing items 12301-12320 of 316660
-
Evaluation of the Rheological Properties of Asphalt Binder Modified with Polyvinylpyrrolidone Grafted onto Water-Soluble Graphene and Analysis of the Modification Mechanism
(American Society of Civil Engineers, 2024)Graphene and its derivatives have garnered significant attention as novel nanomodifiers in the asphalt industry. Despite its vast potential, poor compatibility and dispersion between graphene and asphalt have been persistent ... -
Evaluation of the Residual Bearing Capacity of Prestressed Concrete T-Girder Bridges Based on Bending Stiffness Reduction
(American Society of Civil Engineers, 2025)This paper examines the use of the measured bending stiffness reduction of a prestressed concrete bridge to evaluate its residual bearing capacity (RBC). To create a clear correlation between bending stiffness and the RBC, ... -
Evaluation of the Properties of Mortar Mixed with Multiple Hybrid Functional Materials
(American Society of Civil Engineers, 2025)This study evaluates the fundamental properties (including workability, strength characteristics, and chloride resistance) and durability of mortar mixed with two or more functional materials, including copper powder, ... -
Evaluation of the Performance of Hybrid Geosynthetic–Reinforced Soil Walls Subjected to Rainfall in a Geotechnical Centrifuge
(American Society of Civil Engineers, 2025)In the present study, the centrifuge modeling approach was utilized to investigate the efficacy of dual-functional hybrid geosynthetics as reinforcement in alleviating the destabilizing effects of rainfall on geosyntheti ... -
A Top-Down Hierarchical Decomposition Approach for Generating Process Models to Aid BIM Data Exchanges
(American Society of Civil Engineers, 2025)Process models are a critical component in the development of building information modeling (BIM) software interoperability advances, specifically with information delivery manuals (IDMs). These process models’ formulations ... -
Evaluation of the Mechanical Performance of Asphalt Mixtures Containing Waste Tire Rubber and Graphene
(American Society of Civil Engineers, 2024)This study aimed to evaluate the mechanical performance of asphalt mixtures with tire rubber powder (TRP) and graphene composite-modified asphalt binder. Asphalt mixtures with graphene/TRP-modified binders, as well as ... -
Evaluation of the Effects of Climate Change and Environmental Parameters on Evaporation and Settlement of Unsaturated Soil
(American Society of Civil Engineers, 2024)Realistic estimates of evaporation from unsaturated soils, which are important for many geotechnical and geoenvironmental applications, need to be considered in the context of soil settlement, and require thermohydromechanical ... -
Evaluation of the Characteristics of the Interface between Saline–Alkaline Solutions and Bitumen through Molecular Dynamics Simulations
(American Society of Civil Engineers, 2024)Saline–alkaline solutions have a detrimental impact on the durability of bituminous pavements. Thus, it is important to understand the interaction between saline–alkaline environments and bitumen and investigate the ... -
Evaluation of Machine-Learning Approaches in the Automation of Irrigation Canals Using a Variable-Height Weir
(American Society of Civil Engineers, 2024)Automatic check structures can be important for water distribution in irrigation networks. In this research, a control algorithm was developed for a variable height whirling (VHW) weir, as a regulating structure equipped ... -
Evaluation of Key Performance Aspects of a Novel Precast Noise Barrier Wall System Based on Nonlinear Finite-Element Simulations
(American Society of Civil Engineers, 2024)An extensive experimental program was performed to evaluate the structural behavior of a novel fully prefabricated noise barrier wall system. The experimental investigation entailed the fabrication and testing of two ... -
Evaluation of FRP-Reinforced Concrete Members without Shear Reinforcement: Analysis Using Shear Crack Propagation Theory
(American Society of Civil Engineers, 2024)Determination of the maximum shear capacity of reinforced concrete (RC) beams and slabs has been a challenging task for over 100 years. Recently, the shear crack propagation theory (SCPT) was developed as a unified ... -
Evaluation of Field-Produced Aramid Fiber–Reinforced Asphalt Mixtures
(American Society of Civil Engineers, 2024)This paper summarizes the results of a study that was conducted to evaluate the performance of field-produced aramid fiber-reinforced asphalt mixtures used for resurfacing applications and compare it to that of polymer-modified ... -
Evaluation of Factors Influencing the High Temperature Viscoelastic Response of a Fine Aggregate Matrix Using a Modified Multiple Stress Creep Recovery Test
(American Society of Civil Engineers, 2024)The fine aggregate matrix (FAM), consisting of asphalt binder, mineral filler, fine aggregate, and air voids, plays a major role in the mechanistic response of asphalt mixtures. The behavior of FAM is significantly affected ... -
Evaluation of Different Methods for Cone Resistance Assessment from Dynamic Penetration Tests
(American Society of Civil Engineers, 2025)Dynamic penetration tests (DPT) are largely applied for soil in situ characterization. Cone resistance assessment from DPT is usually based on driving formulas derived from Newtonian approach. These are nevertheless often ... -
Evaluation of Construction Worker Perceptions of Wearable Proximity Sensors during the COVID-19 Pandemic
(American Society of Civil Engineers, 2025)During the COVID-19 pandemic, social distancing was a critical measure to reduce the exposure risk. Restrictions pushed many work settings to develop out-of-the-box solutions to accommodate the requirements, such as contact ... -
A Three-Dimensional Microcrack Inclination–Dependent Anisotropic Compressive Failure Criterion in Brittle Rocks
(American Society of Civil Engineers, 2025)Numerous microcracks with different angles of inclination are found in brittle rocks. The crack angles lead to anisotropic properties of the compression failure of the rock, which greatly affects the evaluation of the ... -
Evaluation of a Novel Methodology to Measure Bicycle Network Connectivity
(American Society of Civil Engineers, 2025)Bicycling is among the most environmentally sustainable and economically affordable travel modes available. The popularity of bicycling activities strongly depends on the availability of well-connected bicycle networks. ... -
Evaluation Model for Crack Detection with Deep Learning: Improved Confusion Matrix Based on Linear Features
(American Society of Civil Engineers, 2025)Damage due to cracking can be detected through either manual visual methods or machine vision techniques for early prevention and maintenance. In recent years, image-based deep learning methods have emerged as potent tools ... -
Evaluation Method of Track Vertical Irregularity on Bridges Based on Vehicle Running Status
(American Society of Civil Engineers, 2024)Evaluating track irregularities is crucial for ensuring the safe operation of trains since they serve as the primary source of excitation for vehicle systems and track structures. In China’s high-speed railway networks, ... -
Evaluation Method for Compressive Properties of Segregated Asphalt Mixtures Based on Digimat and FEM Models
(American Society of Civil Engineers, 2025)To study the mechanical properties of segregated asphalt mixtures, a novel method was developed to generate three-dimensional finite element models for segregated asphalt mixtures. The virtual uniaxial compression tests ...