YaBeSH Digital Library: Recent submissions
Now showing items 11921-11940 of 316660
-
Mechanism and Evolution Model of Particle Breakage of Construction Waste Recycled Aggregates: Implications for a Permeable Base
(American Society of Civil Engineers, 2025)This paper investigates the particle breakage mechanism of construction waste recycled aggregates [including recycled concrete (RC) as the strong component, recycled brick (RB) as the weak component, and natural gravel ... -
Mechanical Strength and Fatigue Properties of Cement-Stabilized Porous Basalt
(American Society of Civil Engineers, 2025)Porous basalts are rarely used as an aggregate for cement-stabilized materials owing to their high connected-void ratio and water-immersion permeability. To examine its engineering properties, this study investigated the ... -
Mechanical Response of Lightly Cemented Sands under Different Orientations of the Principal Stress Axes
(American Society of Civil Engineers, 2025)This paper presents the results of an experimental program aiming to explore the mechanical response of lightly cemented sands under different orientations of the principal stress axes using the hollow cylinder torsional ... -
Mechanical Properties, Microstructure, and Mechanism of Nanosilica-Modified Low-Carbon Magnesium Silicate Hydrate Cement
(American Society of Civil Engineers, 2024)The slow formation of magnesium silicate hydrate (M-S-H) results in insufficient early strength of M-S-H cement, restricting its wide application. In this study, nanosilica (NS) was applied to modify the performance of ... -
Mechanical Properties of the Interface between Reactive Powder Concrete and Aggregates at Different Temperatures
(American Society of Civil Engineers, 2024)To analyze the effect of temperature on the failure of the interface between reactive powder concrete (RPC) and aggregate, a constitutive model based on the elastoplastic theory to describe both tension and shear failure ... -
Mechanical Properties of Superhigh-Strength Q960 Steel at Elevated Temperatures Considering the Tensile Strain Rate
(American Society of Civil Engineers, 2024)This investigation delves into the impact of temperature and tensile strain rate on the mechanical characteristics of high-strength Q960 steel. The inherent strength and stiffness properties of steel undergo degradation ... -
An X-Ray CT Study on Transitional Internal Erosion under Triaxial Shearing
(American Society of Civil Engineers, 2025)Internal erosion poses a significant threat to many geotechnical infrastructures as fine particles removed from gap-graded soils, which can be promoted by mechanical disturbances caused by human activities and natural ... -
Mechanical Properties of Subgrade Soil Reinforced with Basalt Fiber and Cement under Freeze–Thaw Cycles
(American Society of Civil Engineers, 2024)The stability of soil is an essential requirement for various geotechnical engineering projects. The application of composite materials made from cemented soil has become prevalent in road subgrade engineering and foundation ... -
Mechanical Properties and Microstructural Changes in EVA Polymer Mortar Exposed to Elevated Temperature
(American Society of Civil Engineers, 2025)The contribution of ethylene vinyl acetate (EVA) to enhancing cement properties, especially in terms of thermal stability and microstructural changes under elevated temperatures, has not been fully clarified. This research ... -
Mechanical Performance of Hot-Mix Asphalt Modified with Porous Nanosilica Aerogels
(American Society of Civil Engineers, 2025)Asphalt pavements are under extreme strain from high-volume traffic with ultraheavy axle loads, leading to rutting, fatigue, and moisture damage that reduces the useful life of asphalt mixtures. Studies have suggested that ... -
Mechanical Failure Characteristics and Energy Dissipation Laws of the Coal–Concrete Combination under Impact Rates
(American Society of Civil Engineers, 2024)Mining shallow coal seams and deep coal seams is obviously different. In the deep environment of a coal mine, the stress concentration degree is high, and the dynamic load with impact tendency is prominent. In the practice ... -
Mechanical Characteristics of Similar Weakly Cemented Soft Rock under Directional Shear Stress Path and Modified Lade–Duncan Criterion
(American Society of Civil Engineers, 2024)To avoid engineering challenges during roadway excavation or workface mining in weakly cemented soft rock, the characteristics of this rock under the influence of associated stress paths must be explored. Therefore, this ... -
Mechanical Behavior of Mine Overburden Soil Stabilized Using Calcium-Based Stabilizer Used for Pavement Application
(American Society of Civil Engineers, 2025)Mine overburden material (OBM) is the discarded soil–rock mixture, which is abundantly dumped around coal mines. These dumps create a lot of instability and environmental issues. The present study attempts to sustainably ... -
Mechanical Behavior and Microscopic Mechanisms of Glass Fiber–Modified Loess in Seasonally Frozen Regions
(American Society of Civil Engineers, 2025)To reduce the occurrence of specific disasters, such as the freezing of cracks and the uneven settlement of loess subgrade in seasonal freezing areas, glass fiber is selected as a reinforcing material to study its strengthening ... -
Mechanical Behavior and Energy Absorption of TPMS Diamond Structures and Hybrid SC-FCC-BCC Plate-Lattices
(American Society of Civil Engineers, 2024)Architected cellular materials and structures provide the ability to tailor mechanical and functional properties based on design topological aspects. With the progressive advancement of additive manufacturing techniques, ... -
Measurement While Drilling Method for Estimating the Uniaxial Compressive Strength of Rocks Considering Frictional Dissipation Energy
(American Society of Civil Engineers, 2024)Relationships between drilling parameters and the uniaxial compressive strength (UCS) of rocks are typically established through measurement while drilling (MWD) by analyzing either drilling speed or specific energy. This ... -
Mathematical Modeling and Experimental Validation for the Performance of Soil–Bentonite Cutoff Walls Considering Chemical Compatibility
(American Society of Civil Engineers, 2025)The soil–bentonite cutoff wall (SB wall) is commonly employed as a barrier at contaminated sites. However, recent research has revealed that the performance of the SB wall material can significantly deteriorate due to the ... -
An Ontological Knowledge-Driven Smart Contract Framework for Implicit Bridge Preservation Decision Making
(American Society of Civil Engineers, 2025)The decision-making for bridge preservation constitutes two types of rules: explicit rules, which are based on clear specifications to establish an overall baseline preservation plan, and implicit rules, which are rooted ... -
Material Prestraining Effect on Fatigue Performance of Q235 and Q355 Structural Steels
(American Society of Civil Engineers, 2025)The primary difference in fatigue performance between cold-formed steel and hot-rolled steel stems from cold work strengthening. Therefore, this study focuses on the influence of prestraining on the high-cycle fatigue ... -
Material Distribution Planning Method and Experimental Verification under Multinode and Multivehicle Scene
(American Society of Civil Engineers, 2024)In the construction process of construction engineering, there exist a complex construction site layout and multiequipment collaborative work. If a reasonable construction plan cannot be made quickly and accurately, the ...