YaBeSH Digital Library: Recent submissions
Now showing items 10601-10620 of 316660
-
Advanced Exergy Analysis of GT-sCO2 Combined Cycle
(The American Society of Mechanical Engineers (ASME), 2024)The use of the supercritical carbon dioxide Brayton cycle (SCBC) for waste heat recovery from the gas turbine cycle (GTC) can enhance system performance and reduce CO2 emissions. To analyze the possibility of component ... -
Optimization of Oil Bores on Connecting Rod Small End to Prevent Bushing Failures at Maximum Speed
(The American Society of Mechanical Engineers (ASME), 2024)The bushing of connecting rod small end is one of the most prone components to failure in diesel engines. According to the previous study, the oil flowrate and storage of small-end bearing with splash lubrication are both ... -
Experimental Investigation on the Thermal Performance of a Large-Size Aluminum Vapor Chamber for Multi-Point Heat Sources
(The American Society of Mechanical Engineers (ASME), 2024)With the development of electronic information technology, the integration and power of electronic equipment continue to increase. As an efficient heat transfer element, vapor chambers are widely used in the field of heat ... -
Enhancing the Experimental Performance of Axially Rotating Wickless Heat Pipe Using Annular- and Longitudinally Finned Condensers
(The American Society of Mechanical Engineers (ASME), 2024)This paper investigates the impact of longitudinal- and annular-finned condensers on the steady-state thermal performance of a horizontally rotating wickless heat pipe. The parameters investigated include two fin types ... -
Determination of Turbulent Prandtl Number for Thermal Fluid Dynamics Simulation of HVAC Unit by Data Assimilation
(The American Society of Mechanical Engineers (ASME), 2024)Regarding high-precision temperature field prediction of a heating ventilation and air conditioning (HVAC) unit using thermal fluid dynamics simulation, the determination of the turbulent Prandtl number (Prt) was a key ... -
Numerical Analysis on Thermal Behavior of Composite Wall Combined Autoclaved Aerated Concrete With Thermal Insulting Material in Summer Day
(The American Society of Mechanical Engineers (ASME), 2024)Thermal insulation material (TIM) is commonly employed to enhance the thermal behavior of the lightweight walls. To further obtain the energy-saving effect of the walls, the composite wall (ATIM) combined autoclaved aerated ... -
Fluid–Structure Interaction Lubrication Analysis of Compliant Journal Bearing Lubricated With Non-Newtonian Plastic Fluid
(The American Society of Mechanical Engineers (ASME), 2025)High-viscosity plastic fluids and polymer liners are expected to improve the lubrication and load-carrying performance of low-speed and heavy-load journal bearings. The objective of this article is to investigate the ... -
Study on the Looseness Caused by Local Slip and Load Bearing Capacity of Threaded Connections Under Transverse Cyclic Loading
(The American Society of Mechanical Engineers (ASME), 2025)Under transverse cyclic loading, slip will occur on the contact surfaces in a threaded connection, causing rotational loosening of the connection. It is necessary to detect and analyze the loosening behavior of threaded ... -
Data-Driven Prediction of Coefficient of Friction in Wet Friction Components: A Model Development and Interpretability Analysis
(The American Society of Mechanical Engineers (ASME), 2024)Predicting the coefficient of friction (COF) is essential for enhancing the efficiency and reliability of mechanical systems. Nevertheless, traditional mechanistic models relying on fixed values or fitted curves fail to ... -
Analysis of the Film-Forming Characteristics of Water Lubrication Assisted by Small Amount of Secondary Lubricating Oil
(The American Society of Mechanical Engineers (ASME), 2024)This study investigates the film formation mechanism of lubrication using a small quantity of lubricating medium in a water environment. A roller-on-disc test rig combined with a fluorescent technique is employed to directly ... -
MoS2/Ti Co-Deposited Coatings and Their Fretting Wear Properties at Elevated Temperatures
(The American Society of Mechanical Engineers (ASME), 2024)Fretting wear refers to the damage phenomenon experienced by the mechanical components undergoing micro-amplitude relative slip at their contact region due to vibration. Titanium alloys find their extensive application in ... -
Bearing Electrical Erosion Signal Detection Technique Based on Current Signal Analysis for Electric Motors
(The American Society of Mechanical Engineers (ASME), 2024)In modern industries, enhancing the efficiency and performance of electric motors is a critical requirement. Pulse-width modulation (PWM) inverters utilized to enhance the energy efficiency of electric motors generate ... -
Improving the Tribological Behavior of NiTi Alloy via Self-Catalytically Flame Growing Amorphous Carbon Coating
(The American Society of Mechanical Engineers (ASME), 2025)In this work, for surface protection of NiTi alloy, an amorphous carbon layer was directly deposited onto it via a self-catalytic flame coating method. The effect of the flame coating time on the physicochemical structure ... -
Effect of Pulse Current on Friction Coefficient of 7075-T6 Aluminum Alloy and Microstructure Analysis
(The American Society of Mechanical Engineers (ASME), 2024)A study on friction is necessary to improve the forming quality of stamped parts. It has been found that pulsed current can improve the forming properties of aluminum alloys, mainly in terms of Joule heat and electroplasticity. ... -
Research on Working Mechanism and Structural Optimization of High-Speed Bearing of Tricone Bits Based on Finite Difference Method
(The American Society of Mechanical Engineers (ASME), 2024)To analyze the working mechanism of the floating sleeve bearing of the cone bit, the life of the floating sleeve bearing was tested. The experimental results show that adhesive wear will form on the bearing surface with ... -
Investigating the High Temperature Tribological Efficacy of AlCoCrFeNiTi High Entropy Alloy Coating
(The American Society of Mechanical Engineers (ASME), 2024)The current work elucidates the tribological behavior of thermally sprayed AlCoCrFeNiTi high entropy alloy coatings under various temperatures of 200 °C, 400 °C, and 600 °C. Typically, most metallic alloys demonstrate ... -
Factor Analysis-Based Selection of Xanthoceras sorbifolia Bunge Oil as a Promising Bio-Based Lubricant
(The American Society of Mechanical Engineers (ASME), 2024)With increasing environmental awareness, the demand for bio-based lubricants is escalating, positioning vegetable oils as viable alternatives to traditional industrial lubricants. This study employs comprehensive factor ... -
The Antiwear and Friction-Reducing Performance of Magnesium Silicate Hydroxide/Graphite Nanocomposite as a Lubricant Additive
(The American Society of Mechanical Engineers (ASME), 2024)In this article, magnesium silicate hydroxide-graphite (MSH-C) and magnesium silicate hydroxide-graphene oxide (MSH-GO) composites were prepared by doping magnesium silicate hydroxide (MSH) with micron-sized few-layer ... -
Numerical Calculation of the Oil Flow in a Truck Rear Axle Transmission and the Influence of Gear-Induced Air Flow
(The American Society of Mechanical Engineers (ASME), 2024)For the reliable operation of a gearbox, consistently sufficient lubrication of machine elements is necessary. Thus, the gearbox fluid flow plays an important role. The state of the art indicates that computational fluid ... -
Dual Actuator Control Strategy for Temperature Stability in High-Temperature Solar Receivers
(The American Society of Mechanical Engineers (ASME), 2025)Fluctuations in incoming solar energy adversely affect the temperature stability within solar receivers, leading to a decrease in thermal efficiency. Therefore, it is essential to design a control system with the capability ...