Show simple item record

contributor authorT. S. Gross
contributor authorP. N. Kanga
contributor authorV. K. Mathews
date accessioned2017-05-08T23:20:22Z
date available2017-05-08T23:20:22Z
date copyrightOctober, 1985
date issued1985
identifier issn0094-4289
identifier otherJEMTA8-26907#325_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/99914
description abstractBlunt notch fatigue crack initiation tests were carried out on 2.25 Cr – 1 Mo steel and 316L stainless steel in room temperature air and in the process solvent from the Wilsonville, Alabama coal liquefaction pilot plant at 100°C. The crack initiation lifetime in the coal liquids at 100°C was an order of magnitude greater than the crack initiation lifetime in air for the 2.25 Cr–1 Mo steel. The crack initiation lifetime in the coal liquids for the 316L stainless steel was increased a factor of five over the crack initiation lifetime in air. The improvement in crack initiation lifetime was attributed to the coal liquids shielding the materials from atmospheric embrittlement. The coal liquids did not show any tendency to form sulfide corrosion products at 100°C.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of Coal Liquefaction Solvents on Fatigue Crack Initiation in 2 1/4 Cr-1 Mo Steel and 316L Stainless Steel
typeJournal Paper
journal volume107
journal issue4
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.3225826
journal fristpage325
journal lastpage328
identifier eissn1528-8889
keywordsSteel
keywordsCoal liquefaction
keywordsFatigue cracks
keywordsStainless steel
keywordsFracture (Materials)
keywordsCoal
keywordsCorrosion
keywordsEmbrittlement
keywordsTemperature AND Industrial plants
treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record