Show simple item record

contributor authorPaulo Roberto Cetlin
date accessioned2017-05-08T23:18:06Z
date available2017-05-08T23:18:06Z
date copyrightApril, 1984
date issued1984
identifier issn0094-4289
identifier otherJEMTA8-26898#147_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/98552
description abstractThe increase in strength of bars caused by drawing is associated to the average deformation (ε ) imparted to the material by processing. This paper discusses the hardness profile method for evaluating the redundant deformation factor φ, which in turn allows the calculation of ε . For one drawing pass the results obtained are compatible with those from other theories, but it seems that a previous experimental hardness profile evaluation of ε in the literature involved improper calculations. For two successive passes a generalized definition of φ is forwarded. These passes work harden the material less than expected by the external deformation in the bar, and no current theories for φ calculation are adequate for more than one drawing pass.
publisherThe American Society of Mechanical Engineers (ASME)
titleRedundant Deformation Factor Evaluation Through the Hardness Profile Method in Round Section Bar Drawing
typeJournal Paper
journal volume106
journal issue2
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.3225689
journal fristpage147
journal lastpage151
identifier eissn1528-8889
keywordsDeformation
treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record