Show simple item record

contributor authorF. A. Elfaghi
contributor authorJ. P. Langlinais
contributor authorA. T. Bourgoyne
contributor authorW. R. Holden
date accessioned2017-05-08T23:15:16Z
date available2017-05-08T23:15:16Z
date copyrightSeptember, 1983
date issued1983
identifier issn0195-0738
identifier otherJERTD2-26394#372_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/96942
description abstractThe vertical flow of mud and gas-mud mixtures in long pipes is of interest in the design and operation of subsea well control equipment where long choke lines are required. Heretofore, the question of two-phase flow of non-Newtonian drilling muds has not been investigated experimentally in full-scale well systems. Frictional-pressure losses were measured in a 2 3/8-in., 3000-ft long, vertical tubing when flowing drilling mud alone, and flowing mud-gas mixtures. The single-phase data was compared to values predicted by both the Bingham plastic and power law rheological models, which are commonly used to describe non-Newtonian fluids. The multiphase pressure loss data were used to evaluate various published correlation techniques.
publisherThe American Society of Mechanical Engineers (ASME)
titleFrictional Pressure Losses for Single-Phase and Two-Phase Flow of Drilling Muds
typeJournal Paper
journal volume105
journal issue3
journal titleJournal of Energy Resources Technology
identifier doi10.1115/1.3230930
journal fristpage372
journal lastpage378
identifier eissn1528-8994
keywordsDrilling
keywordsPressure
keywordsTwo-phase flow
keywordsMixtures
keywordsFlow (Dynamics)
keywordsControl equipment
keywordsTubing
keywordsOcean engineering
keywordsNon-Newtonian fluids
keywordsDesign AND Pipes
treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record