Show simple item record

contributor authorÖktem Vardar
date accessioned2017-05-08T23:13:25Z
date available2017-05-08T23:13:25Z
date copyrightJuly, 1982
date issued1982
identifier issn0094-4289
identifier otherJEMTA8-26888#192_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/95874
description abstractTests are carried out on compact tension specimens of AISI 1020 hot-rolled steel at nominal stress levels beyond yield. The results show that crack propagation rates can be correlated successfully using an operational definition of the range ΔJ of the J-integral. The rate of crack growth per cycle da/dN is shown to be related to ΔJ by da/dN=A (ΔJ)α for conditions ranging from linear elastic to limit load. The exponent α agrees well with other published data on low strength steels and the quantity A is found to have a weak dependence on frequency. Examination of the fracture surface reveals that static failure modes are operating at the high crack propagation rates.
publisherThe American Society of Mechanical Engineers (ASME)
titleFatigue Crack Propagation Beyond General Yield
typeJournal Paper
journal volume104
journal issue3
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.3225064
journal fristpage192
journal lastpage199
identifier eissn1528-8889
keywordsSteel
keywordsStress
keywordsFracture (Process)
keywordsCrack propagation
keywordsCycles
keywordsFailure
keywordsFatigue cracks AND Tension
treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record