Show simple item record

contributor authorWilliam S. Janna
contributor authorJames E. A. John
date accessioned2017-05-08T23:11:32Z
date available2017-05-08T23:11:32Z
date copyrightNovember, 1981
date issued1981
identifier issn1087-1357
identifier otherJMSEFK-27693#402_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/94780
description abstractMeasurements were made of the drop-size distributions of water and of paint sprays produced by fan-jet pressure nozzles, operating in the pressure range 900 to nearly 3000 psi (6200–20,680 kPa). A collection device was constructed and droplets were captured on soot-coated and on plain microscope slides. Subsequent sizing of the impacted particles with a microscope yielded drop-size distribution data of accumulated volume percent versus diameter. Data were gathered of water and of paint sprays produced by a fan-jet pressure nozzle-preorifice combination. The effect of the preorifice on drop-size distribution was evaluated.
publisherThe American Society of Mechanical Engineers (ASME)
titleDrop-Size Distributions of Newtonian and Bingham Liquid Sprays Produced by Fan-Jet Pressure Nozzles With and Without the Preorifice
typeJournal Paper
journal volume103
journal issue4
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3184504
journal fristpage402
journal lastpage408
identifier eissn1528-8935
keywordsDrops
keywordsNozzles
keywordsSprays
keywordsPressure
keywordsWater
keywordsMicroscopes
keywordsMeasurement
keywordsParticulate matter AND Soot
treeJournal of Manufacturing Science and Engineering:;1981:;volume( 103 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record