Show simple item record

contributor authorL. A. Simpson
date accessioned2017-05-08T23:08:56Z
date available2017-05-08T23:08:56Z
date copyrightJanuary, 1980
date issued1980
identifier issn0094-4289
identifier otherJEMTA8-26874#97_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/93404
description abstractCrack opening displacement (COD) has been determined in Zr-2.5 percent Nb over a wide range of applied stress intensity, K. Prior to initiation of crack extension, COD was determined from measurements of stretch zones in specimens which had undergone hydrogen-induced, sub-critical crack growth. In post initiation measurements (during slow stable crack extension), COD was determined from crack face displacement. Both methods were self consistent and depended on the plastic-zone-corrected K in accordance with the Wells equation. The J-integral was also determined during stable crack extension using the method of Garwood, et al. The results are consistent with the COD measurements based on theoretical relationships between the two crack tip parameters.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Relationship Between Stress Intensity Factor, Crack Opening Displacement and J-Integral in Zr-2.5 Percent Nb
typeJournal Paper
journal volume102
journal issue1
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.3224792
journal fristpage97
journal lastpage100
identifier eissn1528-8889
keywordsStress
keywordsFracture (Materials)
keywordsDisplacement
keywordsZirconium
keywordsMeasurement
keywordsWells
keywordsEquations AND Hydrogen
treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record