Show simple item record

contributor authorShuji Taira
contributor authorRyuichi Ohtani
contributor authorTomio Komatsu
date accessioned2017-05-08T23:06:53Z
date available2017-05-08T23:06:53Z
date copyrightApril, 1979
date issued1979
identifier issn0094-4289
identifier otherJEMTA8-26868#162_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/92221
description abstractOn the basis of the successful results of our previous study on a J-integral approach to the creep crack propagation of steels, the applicability of the creep J-integral to the time dependent fatigue crack propagation in creep range was studied. A satisfactory correlation was obtained between crack propagation rate and creep J-integral, and the same correlation was found in creep crack propagation under constant load as well as two-step loading. It was also found that the cycle dependent fatigue crack propagation rate could be successfully correlated by the cyclic J-integral. The high crack propagation rate in large scale yielding fatigue may be in agreement with the straight line extrapolation on log-log plots of the linear elastic fatigue crack propagation rate versus cyclic J-integral data.
publisherThe American Society of Mechanical Engineers (ASME)
titleApplication of J-Integral to High-Temperature Crack Propagation: Part II—Fatigue Crack Propagation
typeJournal Paper
journal volume101
journal issue2
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.3443669
journal fristpage162
journal lastpage167
identifier eissn1528-8889
keywordsCrack propagation
keywordsFatigue cracks
keywordsHigh temperature
keywordsCreep
keywordsFatigue
keywordsSteel
keywordsStress AND Cycles
treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record