Show simple item record

contributor authorAron Sereny
contributor authorVittorio Castelli
date accessioned2017-05-08T23:05:51Z
date available2017-05-08T23:05:51Z
date copyrightJanuary, 1978
date issued1978
identifier issn0742-4787
identifier otherJOTRE9-28614#70_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/91628
description abstractThe method of matched asymptotic expansion is applied to obtain the pressure distribution and the load carrying capacity for an infinitely long slider bearing, operating under high-speed, low-height, with slip boundary conditions. The pressure distribution is easily applicable as the starting solution for the iterative numerical solution of Reynolds equation. Two examples given show extremely good correlation between this expansion and the numerical solution. It is shown that, for a tapered slider bearing with a bearing number above 100, the reduction in load because of slip is minimal and that, for a parabolic slider, there exists a certain unique bearing number for which the load carrying capacity is independent of the parabolic crown of the slider. It is shown that for a wide slider bearing with large bearing number, the effect of slip is on the order of 1/A.
publisherThe American Society of Mechanical Engineers (ASME)
titlePerturbation Solution of the 1-D Reynolds Equation With Slip Boundary Conditions
typeJournal Paper
journal volume100
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.3453116
journal fristpage70
journal lastpage73
identifier eissn1528-8897
keywordsBoundary-value problems
keywordsEquations
keywordsSlider bearings
keywordsBearings
keywordsLoad bearing capacity
keywordsPressure AND Stress
treeJournal of Tribology:;1978:;volume( 100 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record