Show simple item record

contributor authorL. Kops
contributor authorV. B. Quach
date accessioned2017-05-08T23:01:37Z
date available2017-05-08T23:01:37Z
date copyrightFebruary, 1976
date issued1976
identifier issn1087-1357
identifier otherJMSEFK-27635#360_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/89166
description abstractThe hypothesis of grain boundaries affecting anodic dissolution as well as the concept of their interaction with the electrolyte flow on the workpiece surface subjected to ECM is presented. Scanning electron micrographs provide supporting evidence. It is shown that grain boundaries are preferentially dissolved since they are sites of higher free-energy atoms and consequently have higher rate of metal ions leaving anode surface. Due to greater fluid agitation in boundary depressions they constitute also sites of higher mass transfer, increasing the diffusion rate of dissolved ions into the mainstream of the electrolyte flow. Thus, the more grain boundaries on the surface the better the conditions for dissolution. And since the analysis shows that smaller grains provide more boundaries per unit area, the smaller the grain size the higher the metal removal rate. Tests conducted in an experimental cell designed to provide defined hydrodynamic conditions are described and discussed. Results obtained for Hastelloy-X samples of three different grain sizes confirm the hypothesis showing that for workpiece structure with smaller grain size, higher metal removal rate and current density are obtained.
publisherThe American Society of Mechanical Engineers (ASME)
titleInvestigation on the Role of Workpiece Grain Size in Electrochemical Machining Process
typeJournal Paper
journal volume98
journal issue1
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3438855
journal fristpage360
journal lastpage368
identifier eissn1528-8935
keywordsMachining
keywordsGrain size
keywordsGrain boundaries
keywordsElectrolytes
keywordsIons
keywordsFlow (Dynamics)
keywordsDiffusion (Physics)
keywordsMass transfer
keywordsAtoms
keywordsFluids
keywordsMetals
keywordsAnodes
keywordsElectron microscopy AND Current density
treeJournal of Manufacturing Science and Engineering:;1976:;volume( 098 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record