| contributor author | D. K. Mukherjee | |
| date accessioned | 2017-05-08T23:00:32Z | |
| date available | 2017-05-08T23:00:32Z | |
| date copyright | October, 1976 | |
| date issued | 1976 | |
| identifier issn | 1528-8919 | |
| identifier other | JETPEZ-26728#556_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/88551 | |
| description abstract | This work deals with film cooling of a surface with injection through slots. From the vast number of literatures surveyed, the cooling effectiveness for an ideal geometry—a flat plate with no pressure gradient having tangential blowing from a slot with no lip thickness—could be found by using a suitable blowing parameter for three different regions. The influence of blowing angle and lip geometry has been investigated and defined, each separately. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Film Cooling With Injection Through Slots | |
| type | Journal Paper | |
| journal volume | 98 | |
| journal issue | 4 | |
| journal title | Journal of Engineering for Gas Turbines and Power | |
| identifier doi | 10.1115/1.3446237 | |
| journal fristpage | 556 | |
| journal lastpage | 559 | |
| identifier eissn | 0742-4795 | |
| keywords | Cooling | |
| keywords | Geometry | |
| keywords | Pressure gradient | |
| keywords | Thickness AND Flat plates | |
| tree | Journal of Engineering for Gas Turbines and Power:;1976:;volume( 098 ):;issue: 004 | |
| contenttype | Fulltext | |
