Show simple item record

contributor authorA. L. Ingelfinger
contributor authorR. W. Murray
date accessioned2017-05-08T22:59:30Z
date available2017-05-08T22:59:30Z
date copyrightFebruary, 1975
date issued1975
identifier issn1087-1357
identifier otherJMSEFK-27618#224_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/87956
description abstractOver 200 days of continuous testing have been completed on an integrated waste management-water recovery system developed by General Electric under a jointly funded AEC/NASA/AF Contract. The 4 man system provides urine, feces, and trash collection; water reclamation; storage, heating and dispensing of the water; storage and disposal of the feces and urine residue and all of other nonmetallic waste material by incineration. The heat required for the 1200 deg F purification processes is provided by a single 420-w radioisotope heater. A second 836-w radioisotope heater supplemented by 720 w of electrical heat provides for distillation and water heating. Significant test results are no pre-or-post treatment, greater than 98 percent potable water recovery, approximately 95 percent reduction in solids weight and volume, all outflows are sterile with the water having no bacteria or virus, and the radioisotope capsule radiation level is only 7.9 mrem/hr unshielded at 1 m (neutrons and gamma).
publisherThe American Society of Mechanical Engineers (ASME)
titleIntegrated Water and Waste Management System for Future Spacecraft
typeJournal Paper
journal volume97
journal issue1
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3438542
journal fristpage224
journal lastpage227
identifier eissn1528-8935
keywordsWaste management
keywordsSpace vehicles
keywordsWater
keywordsRadioisotopes
keywordsHeat
keywordsNeutrons
keywordsSolids
keywordsWater storage
keywordsMunicipal solid wastes
keywordsHot water
keywordsWater reuse
keywordsTesting
keywordsRadiation (Physics)
keywordsStorage
keywordsHeating
keywordsBacteria
keywordsOutflow AND Weight (Mass)
treeJournal of Manufacturing Science and Engineering:;1975:;volume( 097 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record