Show simple item record

contributor authorJoseph R. Gartner
contributor authorShrikant T. Bhat
date accessioned2017-05-08T22:59:06Z
date available2017-05-08T22:59:06Z
date copyrightNovember, 1975
date issued1975
identifier issn1087-1357
identifier otherJMSEFK-27631#1199_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/87745
description abstractA relatively thin—thickness to radius ratio—circular ring with rectangular cross section has been investigated to numerically evaluate the effect of eccentricity on the in plane bending natural frequencies and mode shapes. The assumed boundary conditions correspond to a ring freely supported in space such that it is free to translate and rotate with rigid body motion. A truncated Fourier series solution is assumed in an energy formulation to obtain numerical approximations of the eigenvalues and the corresponding eigenvectors for different eccentricities. Extensional and inextensional models for both Flügge and Love-Timoshenko ring models were considered with two thickness to radius ratios. Results show different rates of decrease in the magnitudes of the natural frequencies for different mode configurations. Existence of closely spaced frequencies along with modal coupling are noticeable at 50 percent eccentricity.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfluence of Geometric Imperfections on Vibrational Frequencies of Thin Rings
typeJournal Paper
journal volume97
journal issue4
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3438728
journal fristpage1199
journal lastpage1203
identifier eissn1528-8935
keywordsFrequency
keywordsThickness
keywordsEigenvalues
keywordsFourier series
keywordsMotion
keywordsApproximation
keywordsBoundary-value problems AND Shapes
treeJournal of Manufacturing Science and Engineering:;1975:;volume( 097 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record