Show simple item record

contributor authorS. Briccoli Bati
contributor authorG. Ranocchiai
contributor authorL. Rovero
date accessioned2017-05-08T22:39:01Z
date available2017-05-08T22:39:01Z
date copyrightAugust 1999
date issued1999
identifier other%28asce%290733-9399%281999%29125%3A8%28922%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/85046
description abstractA micromechanical model is proposed for determining the overall linear elastic mechanical properties of simple-texture brick masonry. The model, originally developed for long-fiber composites, relies on the exact solution due to Eshelby and describes brickwork as a mortar matrix with insertions of elliptical cylinder-shaped bricks. Macroscopic elastic constants are derived from the mechanical properties of the constituent materials and phase volume ratios. Conformity of the suggested model to real brickwork behavior has been verified by performing uniaxial compression tests on masonry panels composed of fired bricks and mud mortar. Composite masonry panels of varying phase percentages were then constructed and tested by replacing several of the fired bricks with mud bricks. Comparison of experimental results with theoretical predictions demonstrates that the model is suitable even in the presence of strongly differentiated phases, and is moreover able to predict different behavior as a function of phase concentration. The model fits experimental results more closely than the micromechanical models previously reported in the literature.
publisherAmerican Society of Civil Engineers
titleSuitability of Micromechanical Model for Elastic Analysis of Masonry
typeJournal Paper
journal volume125
journal issue8
journal titleJournal of Engineering Mechanics
identifier doi10.1061/(ASCE)0733-9399(1999)125:8(922)
treeJournal of Engineering Mechanics:;1999:;Volume ( 125 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record