| contributor author | Yu Zhao | |
| contributor author | M. Keith Sharp | |
| contributor author | Ken James | |
| date accessioned | 2017-05-08T22:38:27Z | |
| date available | 2017-05-08T22:38:27Z | |
| date copyright | October 1998 | |
| date issued | 1998 | |
| identifier other | %28asce%290733-9399%281998%29124%3A10%281151%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/84698 | |
| description abstract | The control volume-based finite-element method was used to investigate the transverse lift on a circular cylinder in a two-dimensional (2D) channel flow. The study was organized in two consecutive steps: (1) Flow past a stationary cylinder; and (2) flow past a freely translating and rotating cylinder. The ratio of the diameter of the cylinder-to-height of the channel was 0.1. The effects contributing to the lift from the fluid inertia, the rotation of the cylinder, and the proximity of the cylinder to the wall of the channel were explored. The results showed that with a stationary cylinder model, the lift was positive everywhere across the channel and pushed the cylinder toward the center of the channel; however, with a freely translating cylinder model, the lift was positive when | |
| publisher | American Society of Civil Engineers | |
| title | Finite-Element Analysis of Transverse Lift on Circular Cylinder in 2D Channel Flow | |
| type | Journal Paper | |
| journal volume | 124 | |
| journal issue | 10 | |
| journal title | Journal of Engineering Mechanics | |
| identifier doi | 10.1061/(ASCE)0733-9399(1998)124:10(1151) | |
| tree | Journal of Engineering Mechanics:;1998:;Volume ( 124 ):;issue: 010 | |
| contenttype | Fulltext | |
