Show simple item record

contributor authorRobert H. Bryant
date accessioned2017-05-08T22:35:20Z
date available2017-05-08T22:35:20Z
date copyrightJanuary 1991
date issued1991
identifier other%28asce%290733-9399%281991%29117%3A1%28154%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/83163
description abstractThe problem of minimizing the volume (weight) of an elastic beam subjected to a compliance constraint is the subject of this paper. Specifically, the necessary conditions for the minimum volume are established for the case of beams, consisting of longitudinal segments of different constant cross‐sectional areas, subjected to moving loads. Two examples are considered, one for a moving concentrated load and the second for a distributed load. The results are the load location, the segment lengths and areas, and therefore the volume of the beam. For the case of the concentrated load, additional results are considered if the segment lengths are predetermined. That is, the load location and segment areas are established. The results are presented for beam cross sections that are sandwich type with different sheet thickness, solid cross sections of different widths and different depths.
publisherAmerican Society of Civil Engineers
titleOptimal Design of Elastic Beams for Moving Loads
typeJournal Paper
journal volume117
journal issue1
journal titleJournal of Engineering Mechanics
identifier doi10.1061/(ASCE)0733-9399(1991)117:1(154)
treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record