Show simple item record

contributor authorSuresh P. Pai
contributor authorDavid W. Jensen
date accessioned2017-05-08T22:06:53Z
date available2017-05-08T22:06:53Z
date copyrightJanuary 2001
date issued2001
identifier other29116360.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/71630
description abstractThe filament-winding process introduces inherent geometric defects into thin-shell cylinders in the form of fiber-bundle, or tow, crossovers. This research identified the micromechanical geometry in the fiber crossover regions of filament-wound cylinders. A stiffness model was developed for the crossover regions based on a modified classical lamination theory. The local stiffness-coupling values predicted by this model were incorporated into a global finite-element model of thin-shell, filament-wound cylinders. Eigenvalue buckling analyses performed using this enhanced finite-element model are compared to eigenvalue analyses performed without incorporating the influence of the stiffness couplings at the fiber crossover regions. Experiments were carried out in which 16 filament-wound cylinders with four different surface patterns were fabricated and tested. The results showed that the accuracy of a finite-element analysis improved significantly when the stiffness coupling effects due to fiber undulations were properly accounted for in the analytical model.
publisherAmerican Society of Civil Engineers
titleInfluence of Fiber Undulations on Buckling of Thin Filament-Wound Cylinders in Axial Compression
typeJournal Paper
journal volume14
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)0893-1321(2001)14:1(12)
treeJournal of Aerospace Engineering:;2001:;Volume ( 014 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record