| contributor author | Michael S. | |
| contributor author | Morse | |
| contributor author | Ning | |
| contributor author | Lu | |
| contributor author | Alexandra | |
| contributor author | Wayllace | |
| contributor author | Jonathan W. | |
| contributor author | Godt | |
| contributor author | W. A. | |
| contributor author | Take | |
| date accessioned | 2017-05-08T22:06:02Z | |
| date available | 2017-05-08T22:06:02Z | |
| date copyright | September 2014 | |
| date issued | 2014 | |
| identifier other | 26202866.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/71334 | |
| description abstract | This paper extends Culmann’s vertical-cut analysis to unsaturated soils. To test the extended theory, unsaturated sand was compacted to a uniform porosity and moisture content in a laboratory apparatus. A sliding door that extended the height of the free face of the slope was lowered until the vertical cut failed. Digital images of the slope cross section and upper surface were acquired concurrently. A recently developed particle image velocimetry (PIV) tool was used to quantify soil displacement. The PIV analysis showed strain localization at varying distances from the sliding door prior to failure. The areas of localized strain were coincident with the location of the slope crest after failure. Shear-strength and soil-water-characteristic parameters of the sand were independently tested for use in extended analyses of the vertical-cut stability and of the failure plane angle. Experimental failure heights were within 22.3% of the heights predicted using the extended theory. | |
| publisher | American Society of Civil Engineers | |
| title | Experimental Test of Theory for the Stability of Partially Saturated Vertical Cut Slopes | |
| type | Journal Paper | |
| journal volume | 140 | |
| journal issue | 9 | |
| journal title | Journal of Geotechnical and Geoenvironmental Engineering | |
| identifier doi | 10.1061/(ASCE)GT.1943-5606.0001119 | |
| tree | Journal of Geotechnical and Geoenvironmental Engineering:;2014:;Volume ( 140 ):;issue: 009 | |
| contenttype | Fulltext | |