Show simple item record

contributor authorMartin Weickgenannt
contributor authorZoran Kapelan
contributor authorMirjam Blokker
contributor authorDragan A. Savic
date accessioned2017-05-08T22:03:09Z
date available2017-05-08T22:03:09Z
date copyrightNovember 2010
date issued2010
identifier other%28asce%29wr%2E1943-5452%2E0000117.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/69925
description abstractA method for optimizing sensor locations to effectively and efficiently detect contamination in a water distribution network is presented here. The problem is formulated and solved as a twin-objective optimization problem with the objectives being the minimization of the number of sensors and minimization of the risk of contamination. Unlike past approaches, the risk of contamination is explicitly evaluated as the product of the likelihood that a set of sensors fails to detect contaminant intrusion and the consequence of that failure (expressed as volume of polluted water consumed prior to detection). A novel importance-based sampling method is developed and used to effectively determine the relative importance of contamination events, thus reducing the overall computation time. The above problem is solved by using the nondominated sorting genetic algorithm II. The methodology is tested on a case study involving the water distribution system of Almelo (The Netherlands) and the potential intrusion of
publisherAmerican Society of Civil Engineers
titleRisk-Based Sensor Placement for Contaminant Detection in Water Distribution Systems
typeJournal Paper
journal volume136
journal issue6
journal titleJournal of Water Resources Planning and Management
identifier doi10.1061/(ASCE)WR.1943-5452.0000073
treeJournal of Water Resources Planning and Management:;2010:;Volume ( 136 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record