Time-Response Analysis of Arching Unreinforced Concrete Block Walls Subjected to Blast Loads

Abstract

The new ASCE59-11 standards currently limit the use of unreinforced masonry (URM) walls in blast-resistant construction, regardless of the wall boundary conditions. This is attributable in part to the lack of experimental and analytical studies focusing on evaluating the response of URM walls under blast when the walls are forced to arch between the surrounding frame members. In this paper, the out-of-plane displacement response and structural stability of one-way vertical arching URM walls subjected to blast loads are investigated. A simple bilinear moment-rotation relationship is developed to simulate the arching wall responses. The model takes into account the masonry material strength, thrust forces, and wall geometry. Time-response analyses were performed using both single-degree-of-freedom (SDOF) and two-degrees-of-freedom (2DOF) models. Both models take into account the rocking phenomenon and second-order effects. Responses generated by both models were validated using experimental data reported previously. For preliminary design, performance charts were developed to correlate the effects of the wall slenderness ratio, masonry strength, and block size to the wall response under different levels of blast loads. The developed model and charts can be used as simple and quick calculation tools to estimate the required thickness, height, and strength of the wall under an expected blast threat when hardening of URM walls is necessary, with arching being considered as one of the alternatives.