Show simple item record

contributor authorG. Mutoti
contributor authorJ. D. Dietz
contributor authorSyed A. Imran
contributor authorN. Uddin
contributor authorJ. S. Taylor
date accessioned2017-05-08T21:56:06Z
date available2017-05-08T21:56:06Z
date copyrightFebruary 2007
date issued2007
identifier other%28asce%290733-9372%282007%29133%3A2%28173%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/66976
description abstractAn original model by Mutoti in 2003 was developed mathematically, and empirically, to predict the increase in total iron concentration in distribution systems. This model, referred to as a flux model, relates the increase in iron concentration in a reach of unlined or galvanized iron pipe to the surface area of the pipe in contact with the water. A flux term, defined with a dimension of mass per area per time was used. The effects of water chemistry, pipe material and hydraulic conditions were incorporated into the flux term. This paper describes the verification of the flux model using independent pilot data obtained with variable water quality under worst case, laminar flow conditions. The original model accurately predicted iron release for this independent verification data, with an overall
publisherAmerican Society of Civil Engineers
titlePilot-Scale Verification and Analysis of Iron Release Flux Model
typeJournal Paper
journal volume133
journal issue2
journal titleJournal of Environmental Engineering
identifier doi10.1061/(ASCE)0733-9372(2007)133:2(173)
treeJournal of Environmental Engineering:;2007:;Volume ( 133 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record