Show simple item record

contributor authorA. Freire Diogo
contributor authorMaria C. Oliveira
date accessioned2017-05-08T21:51:41Z
date available2017-05-08T21:51:41Z
date copyrightJuly 2013
date issued2013
identifier other%28asce%29hy%2E1943-7900%2E0000730.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/64567
description abstractInverted siphons are particular structures in sewerage and drainage systems that are frequently associated with difficulties in hydraulic design and operating conditions. Air injection in the base of the rising branch of the sanitary siphons may solve problems often found in conventional design, such as the available hydraulic head and the flow velocity required, or the frequent deposition of suspended solids and organic matter. A model was developed for numerical integration of the energy differential equation for gradually varied steady flow of the two-phase flow of the rising leg considering isothermal conditions. The results of the model application were compared with published data measured on air-lift pumps and with data obtained in a siphon experimental setup with two barrels of different diameters, which was specifically constructed and tested for the research. The numerical results for the set of parameters used and corresponding calibration data show a good agreement with the experimental measurements, primarily for the barrel with the smaller diameter.
publisherAmerican Society of Civil Engineers
titleA Preliminary Numerical Approach for the Study of Compressed Air Injection in Inverted Siphons
typeJournal Paper
journal volume139
journal issue7
journal titleJournal of Hydraulic Engineering
identifier doi10.1061/(ASCE)HY.1943-7900.0000702
treeJournal of Hydraulic Engineering:;2013:;Volume ( 139 ):;issue: 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record