Show simple item record

contributor authorAndy Philipp
contributor authorRudolf Liedl
contributor authorThomas Wöhling
date accessioned2017-05-08T21:51:20Z
date available2017-05-08T21:51:20Z
date copyrightMay 2012
date issued2012
identifier other%28asce%29hy%2E1943-7900%2E0000544.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/64371
description abstractComing from the zero inertia (ZI) equations, an analytical model to describe sheet flow phenomena with a special focus on rainfall runoff processes is developed. A slight modification of the ZI equations, which draws upon the concept of a momentum-representative cross-section of the moving water body, leads—after comprehensive mathematical calculus—to an analytical solution describing essentially one-dimensional, shallow overland flow. In a test series, the analytical ZI model is applied together with three numerical models, one based on the Saint-Venant equations, one on the kinematic wave equations, and another one on diffusion wave equations. The test application refers to a typical rainfall runoff situation, i.e., rather shallow overland flow on a hillslope as a consequence of excess rainfall. Contrary to the analytical model, the comparative analysis clearly shows the difficulties of the numerical solutions in terms of exactness and robustness when approaching typical shallow water depths. This problem of numerical models is tackled by applying small time and space discretization, which, however, comes along with higher CPU execution times. Besides the good computational efficiency and freedom of any numerical inconvenience, the new analytical model outperforms the numerical models for typical overland flow simulations. This particularly refers to a highly satisfactory fulfillment of the mass balance and a nearly perfect match of peak flow rates.
publisherAmerican Society of Civil Engineers
titleAnalytical Model of Surface Flow on Hillslopes Based on the Zero Inertia Equations
typeJournal Paper
journal volume138
journal issue5
journal titleJournal of Hydraulic Engineering
identifier doi10.1061/(ASCE)HY.1943-7900.0000519
treeJournal of Hydraulic Engineering:;2012:;Volume ( 138 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record