Show simple item record

contributor authorE. C. Jamieson
contributor authorC. D. Rennie
contributor authorR. B. Jacobson
contributor authorR. D. Townsend
date accessioned2017-05-08T21:51:04Z
date available2017-05-08T21:51:04Z
date copyrightSeptember 2011
date issued2011
identifier other%28asce%29hy%2E1943-7900%2E0000398.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/64217
description abstractDetailed mapping of bathymetry and apparent bed load velocity using a boat-mounted acoustic Doppler current profiler (ADCP) was carried out along a 388-m section of the lower Missouri River near Columbia, Missouri. Sampling transects (moving boat) were completed at 5- and 20-m spacing along the study section. Stationary (fixed-boat) measurements were made by maintaining constant boat position over a target point where the position of the boat did not deviate more than 3 m in any direction. For each transect and stationary measurement, apparent bed load velocity (
publisherAmerican Society of Civil Engineers
titleEvaluation of ADCP Apparent Bed Load Velocity in a Large Sand-Bed River: Moving versus Stationary Boat Conditions
typeJournal Paper
journal volume137
journal issue9
journal titleJournal of Hydraulic Engineering
identifier doi10.1061/(ASCE)HY.1943-7900.0000373
treeJournal of Hydraulic Engineering:;2011:;Volume ( 137 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record