Show simple item record

contributor authorMohamed Hwash
contributor authorJan Knippers
date accessioned2017-05-08T21:37:07Z
date available2017-05-08T21:37:07Z
date copyrightAugust 2014
date issued2014
identifier other%28asce%29cc%2E1943-5614%2E0000452.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/57596
description abstractThe paper presents experimental work to determine the load-bearing capacity, strain responses up to failure, and failure mode of pultruded carbon fiber–reinforced polymer (CFRP) strips with different deviation saddle geometries. Several tests with different deviation angles and deviation saddle radii were carried out. The results show that the tensile strength of the CFRP strip is reduced significantly by deviation, even if the deviation radius is comparatively large in relation to the thickness of the CFRP strips. Further tests were carried out to determine the influence of other important parameters on the load-bearing capacity of the strip such as surface properties of the saddle. With the help of a polyethylene layer (PE-HD) between the CFRP strip and the deviation saddle, friction could be reduced. This leads to an increase in the breaking strength of the CFRP strip. The effect of these parameters on the load-bearing capacity of the CFRP strip is presented in this article.
publisherAmerican Society of Civil Engineers
titleLoad-Bearing Capacity of Deviated CFRP Strips
typeJournal Paper
journal volume18
journal issue4
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)CC.1943-5614.0000449
treeJournal of Composites for Construction:;2014:;Volume ( 018 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record