Show simple item record

contributor authorChris P. Pantelides
contributor authorDomingo A. Moran
date accessioned2017-05-08T21:36:39Z
date available2017-05-08T21:36:39Z
date copyrightAugust 2013
date issued2013
identifier other%28asce%29cc%2E1943-5614%2E0000335.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/57470
description abstractA design method is developed for determining the required thickness of fiber-reinforced polymer (FRP) composite jackets in rehabilitating RC columns to achieve a target displacement ductility. The method is applicable to RC columns with a rectangular, square, or circular cross section. The FRP jacket thickness is determined from the target ultimate compressive strain of confined concrete within the plastic hinge region. The design is based on the strain ductility increase provided by the jacket. Relationships are introduced to determine the minimum FRP jacket thickness required to preclude strain-softening compressive behavior of rectangular, square, or circular columns. This minimum jacket stiffness can prevent premature failure of the FRP jacket due to uncontrolled dilation of the confined concrete. The design procedure compares favorably with experimental results from the literature for columns upgraded with FRP jackets, which displayed a substantial displacement ductility increase.
publisherAmerican Society of Civil Engineers
titleDesign of FRP Jackets for Plastic Hinge Confinement of RC Columns
typeJournal Paper
journal volume17
journal issue4
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)CC.1943-5614.0000332
treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record