Show simple item record

contributor authorH. O. Köksal
contributor authorS. Aktan
contributor authorA. O. Kuruşçu
date accessioned2017-05-08T21:36:29Z
date available2017-05-08T21:36:29Z
date copyrightAugust 2012
date issued2012
identifier other%28asce%29cc%2E1943-5614%2E0000271.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/57401
description abstractThe focus of the work described in this paper is on the development of a practical Drucker-Prager (DP) type constitutive model for the nonlinear finite-element analysis (NLFEA) of fiber-reinforced polymers (FRP)–confined masonry columns under concentric compression. This paper introduces analytical relations for the cohesion and internal friction angle for masonry constituents, i.e., solid clay bricks and mortar. The proposed relations account for the slight change of the linear part of the compressive meridian into a curve at higher hydrostatic pressure values and predict the compressive and tension meridians of concrete even for high hydrostatic pressure. Evaluating possible failure criteria in FRP-confined masonry columns, 14 test specimens from three major experimental studies are successively modeled through the proposed approach. The results of NLFEA show both satisfactory predictions of the stress-strain response of the columns and theoretical understanding for the strain distributions in the FRP sheets.
publisherAmerican Society of Civil Engineers
titleElastoplastic Finite-Element Analysis of FRP-Confined Masonry Columns
typeJournal Paper
journal volume16
journal issue4
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)CC.1943-5614.0000268
treeJournal of Composites for Construction:;2012:;Volume ( 016 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record