Show simple item record

contributor authorS. Maksimovic
contributor authorM. Kozic
contributor authorS. Stetic-Kozic
contributor authorK. Maksimović
contributor authorI. Vasović
contributor authorM. Maksimovic
date accessioned2017-05-08T21:34:17Z
date available2017-05-08T21:34:17Z
date copyrightNovember 2014
date issued2014
identifier other%28asce%29as%2E1943-5525%2E0000302.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/56454
description abstractTo define load spectra of main rotor blades in this study computational fluid dynamics (CFD) software is used. The aim of the present investigation is the development of a CFD computation procedure capable of accurately simulating the flow around a full helicopter especially around main rotor blades. For this purpose the complete helicopter configuration including fuselage, main rotor and tail rotor computer-aided design (CAD) models are used in CFD modeling and determination of loads. Primary attention in this investigation is focused on defining loads of main rotor blades because metal trailing edge segments of these blades were replaced with a new segments made from honeycomb composite materials. As critical structural parts with respects to strength here are glued joints between metal and composite segments of trailing edge are considered. For precise stress analysis of these segments, including glued joints, the finite element method is used.
publisherAmerican Society of Civil Engineers
titleDetermination of Load Distributions on Main Helicopter Rotor Blades and Strength Analysis of Its Structural Components
typeJournal Paper
journal volume27
journal issue6
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000301
treeJournal of Aerospace Engineering:;2014:;Volume ( 027 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record